Abstract:Multifunctional sensing devices with high flexibility, high sensitivity, and scalable fabrication are inevitable components of Internet of Things (IoT) for human–machine interfaces, structural health monitoring, and soft robots. Herein, high-performance flexible sensor arrays using carboxymethylcellulose (CMC) and its composite were developed for mechanical and thermal stimuli detection by laser direct writing. CMC contains abundant carbon precursors for strain-sensitive laser-carbonized CMC (LC-CMC), while the incorporation of graphene oxide (GO) into CMC leads to the formation of thermal-sensitive laser-carbonized GO/CMC (LC-GO/CMC). The LC-CMC-based strain sensor delivers gauge factors of 487.7 (strain < 8.5%) and 8557 (8.5% < strain < 14%), with long-term stability over 10 000 cycles. With 0.2 wt % GO, the LC-GO/CMC-based device provides a temperature coefficient of resistance of −0.289% °C <sup>–1</sup>, higher than the Cr-based commercial sensor. The potential application of the devices in IoT is proved by combining the near-field communication technology with the LC-CMC-based device to monitor the strain suffered by 316L stainless steel during the fatigue test. Moreover, an integrated device based on the strain and temperature sensing arrays accomplishes the simultaneous measurement of temperature and mechanical deformation in real time.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21168?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21168</a>.Photography of LC-CMC-based patterns; optical images of LC-CMC-based samples; calculation results of the heat transition process at the interface of the laser beam and CMC substrate; SEM, TEM, and XPS analyses of LC-CMC- and LC-GO/CMC-based samples; electrical response of the LC-GO/CMC-based temperature sensor under different concentrations of GO solution; application of the devices combining NFC technology with LC-CMC-based strain sensors to monitor the strain suffer by 316L materials during stretch–release cycles; table of conductivity and statistic data for widths of carbonization area of LC-CMC-based samples generated under different laser powers and writing speeds (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21168/suppl_file/am0c21168_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Influence of Laser Power on Achieving Ultra Low Stiffness in Resistive Strain Gauges Through on Laser Bonding Transfer‐Patterning of Multiwall Carbon Nanotubes (MWCNTs) onto Polydimethylsiloxane (PDMS) Film

Highly stretchable, superhydrophobic and wearable strain sensors based on the laser-irradiated PDMS/CNT composite

Enhanced electrical conductivity in laser-induced graphene-silicon carbide laminated nanosheets for flexible strain sensors and pulse wave velocity assessment

Deformable Strain Sensors Based on Patterned Mwcnts/Polydimethylsiloxane Composites

Development of highly sensitive and stable patterned PDMS flexible strain sensors for motion monitoring via laser direct writing

Facile fabrication of sensitivity-tunable strain sensors based on laser-patterned micro-nano structures

Flexible and transparent strain sensors based on super-aligned carbon nanotube films.

Laser Direct Writing of Flexible Sensor Arrays Based on Carbonized Carboxymethylcellulose and Its Composites for Simultaneous Mechanical and Thermal Stimuli Detection

Construction of laser-induced graphene/silver nanowire composite structures for low-strain, high-sensitivity flexible wearable strain sensors

Flexible and Transparent Strain Sensors with Embedded Multiwalled Carbon Nanotubes Meshes.

Graphene Nanoplatelets/Polydimethylsiloxane Flexible Strain Sensor with Improved Sandwich Structure

Fabrication of electrically conductive poly(styrene-b-ethylene-ran-butylene-b-styrene)/multi-walled carbon nanotubes composite fiber and its application in ultra-stretchable strain sensor

Laser-Induced Graphene Electrodes on Poly(ether–ether–ketone)/PDMS Composite Films for Flexible Strain and Humidity Sensors

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure

Cost-Effective Fabrication of Transparent Strain Sensors via Micro-Scale 3D Printing and Imprinting

Flexible Strain Sensors with Enhanced Sensing Performance Prepared from Biaxially Stretched Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

Femtosecond laser irradiation induced heterojunctions between carbon nanofibers and silver nanowires for a flexible strain sensor

Direct Patterning of Carbon Nanotube via Stamp Contact Printing Process for Stretchable and Sensitive Sensing Devices

Full‐Range On‐Body Strain Sensor of Laser‐Induced Graphene Embedded in Thermoplastic Elastomer via Hot Pressing Transfer for Monitoring of the Physiological Signals

Laser-Induced Graphene Stretchable Strain Sensor with Vertical and Parallel Patterns

Highly Stretchable, Sensitive and Wide Linear Responsive Fabric-Based Strain Sensors with a Self-Segregated Carbon Nanotube (cnt)/polydimethylsiloxane (PDMS) Coating