Abstract:The CABRI research reactor located at CEA Cadarache is dedicated to the analysis of nuclear fuel behavior during Reactivity-Injection Accident (RIA) in Pressurized Water Reactors (PWRs). The reactor experimentally simulates power pulse transients in the driver zone, which induce a RIA-representative energy deposition in a fuel sample contained in a water-loop that reproduces PWR thermal-hydraulics conditions. Power pulses are initiated by the 3 He depressurization of four transient rods, which introduces reactivity into the core. The injection of reactivity causes the reactor power to increase rapidly, resulting in a rise in fuel temperature. This temperature rise mitigates the power excursion by the Doppler effect. Subsequently, heat transfer occurs between the fuel, the cladding and the moderator. The evolution of the core power is measured during power transients, and these measurements can be valorized for the experimental validation of multi-physics simulation tools. Indeed, the experimental validation of these coupling mainly relies on measurement data coming from the current industrial reactor fleet. The measurement data coming from experimental facilities for the validation of multi-physics coupling at the reactor scale are very rare. A multi-physics core modelling based on the APOLLO3® and THEDI tools within the coupling platform C3PO was developed to simulate power transients in the CABRI reactor. A step-wise validation process has been defined and applied to this multi-physics coupling, from the numerical validation against Monte Carlo calculations at the neutron lattice level, to the integral experimental validation at the core level. Two types of transients were simulated: firstly, three neutron-driven supercritical transients (in which reactivity feedbacks are negligible), and secondly, a prompt supercritical transient, which is a high-energy transient with a five-decade power increase. The Calculation/Measurement (C/M) discrepancies on core power during supercritical transients can be explained with the support of the numerical validation results. However, the C/M discrepancies on the high-energy transient will require further investigation. A methodology to propagate nuclear data covariances in the multi-physics coupled simulation has been defined and implemented for CABRI transients. The first results of the covariance propagation on the high-energy transient showed that they cannot explain the C/M discrepancies. The impact of technological and experimental uncertainties on the transient simulation have to be analyzed. Finally, only the global core power is measured by ex-core instrumentation during the transient; it would be useful to carry out new local measurements at the pin-scale in the near future.

Foreword: Special issue on the Power-to-Melt and Maneuverability (P2M) Simulation Exercise

Interoperability of Materials Database Systems in Support of Nuclear Energy Development and Potential Applications for Fuel Cell Material Selection

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Foreword: Special issue on the Nuclear Energy Advanced Modeling and Simulation Thermal Hydraulics Integrated Research Project

International fuel performance study of fresh fuel experiments for PCMI effects during RIA experiments

Recent developments in coupled experiments and simulation to understand the fluid–structure dynamics of a Pressurized Water Reactor fuel assembly

Special issue on the Nuclear Energy Advanced Modeling and Simulation Thermal Hydraulics Integrated Research Project

AN INITIATIVE FOR THE DEVELOPMENT AND APPLICATION OF OPEN-SOURCE MULTI-PHYSICS SIMULATION IN SUPPORT OF R&D AND E&T IN NUCLEAR SCIENCE AND TECHNOLOGY

Assessing the PLEIADES/GERMINAL V3 fuel performance code against transmutation experiments in sodium fast reactors

Research and development related to PFM for aged nuclear components

Analysis of power transients in the CABRI experimental reactor with a multi-physics APOLLO3®/THEDI coupling

Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident

The MOOSE Multiphysics Computational Framework for Nuclear Power Applications: A Special Issue of Nuclear Technology

Technical issues and requirements of experiments and facilities for fusion nuclear technology

Fuel performance code to code comparative analysis for the OECD/NEA MPCMIV benchmark

Intermediate energy proton irradiation: Rapid, high-fidelity materials testing for fusion and fission energy systems

Neutronic analysis of IFMIF-DONES test cell cooling system

Managing the heat: In-Vessel Components

Eurofusion Contributions To Iter Nuclear Operation

A methodology for accelerated design of irradiation experiments: Demonstration via an OpenFOAM-informed TRANSURANUS simulation

OVERVIEW OF NEUTRON MEASUREMENTS IN JET FUSION DEVICE