Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate)

Ga Ram Lee,Eun Jong Lee,Hye Sun Shin,Joonwoo Kim,Il Kim,Sung Chul Hong

DOI: https://doi.org/10.3390/polym16081171

IF: 5

2024-04-22

Polymers

Abstract:This study presents the synthesis and characterization of non-isocyanate polyurethanes (NIPU) derived from the copolymerization of cyclic-carbonated soybean oil (CSBO) and cyclic carbonate (CC)-terminated poly(ether carbonate) (RCC). Using a double-metal cyanide catalyst, poly(ether carbonate) polyol was first synthesized through the copolymerization of carbon dioxide and propylene oxide. The terminal hydroxyl group was then subjected to a substitution reaction with a five-membered CC group using glycerol-1,2-carbonate and oxalyl chloride, yielding RCC. Attempts to prepare NIPU solely using RCC and diamine were unsuccessful, possibly due to the low CC functionality and the aminolysis of RCC's linear carbonate repeating units. However, when combined with CSBO, solid NIPUs were successfully obtained, exhibiting good thermal stability along with enhanced mechanical properties compared to conventional CSBO-based NIPU formulations. Overall, this study underscores the potential of leveraging renewable resources and carbon capture technologies to develop sustainable NIPUs with tailored properties, thereby expanding their range of applications.

polymer science

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the tensile strength of non - isocyanate polyurethane (NIPU) prepared from cyclo - carbonated soybean oil (CSBO). Due to the presence of flexible alkane chains, the traditional CSBO - based NIPU has a low tensile strength, usually between 2 - 3 MPa. To overcome this limitation, the researchers introduced carbon - dioxide - based polyether carbonate (PEC) polyol. Through its rigid carbonate units, it promotes strong entanglement between polymer chains, which is expected to increase the tensile strength of NIPU. Specifically, the researchers adopted a multi - step synthesis method: 1. **Preparation of PEC polyol**: Use a double - metal cyanide (DMC) catalyst to prepare PEC polyol through the copolymerization reaction of carbon dioxide and propylene oxide. 2. **Synthesis of five - membered ring carbonate - terminated polyether carbonate (RCC)**: Prepare RCC by substituting the terminal hydroxyl group of PEC polyol with a cyclic carbonate precursor. 3. **Preparation of NIPU**: Mix RCC with CSBO and cure with 1,3 - diaminopropane (TDA) to form NIPU. Through this method, the researchers hope to develop an environmentally friendly NIPU with enhanced mechanical properties to expand its application range. In addition, this study also emphasizes the potential of using renewable resources and carbon capture technologies to develop sustainable NIPU.

Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate)

Synthesis of CO2-Derived, Siloxane-Functionalized Poly(ether Carbonate)s and Waterborne Polyurethanes

Carbodiimide-Assisted Synthesis of High Purity Bis(cyclic carbonate) Under Atmospheric Conditions for Preparation of Non-Isocyanate Polyurethane

Chemically Recyclable Biobased Non‐Isocyanate Polyurethane Networks from CO2‐Derived Six‐membered Cyclic Carbonates

Synthesis and Characterization of Cardanol-Based Non-Isocyanate Polyurethane

Mechanically strong non-isocyanate polyurethane thermosets from cyclic carbonate linseed oil

Ionic Liquid Catalysis in Cyclic Carbonate Synthesis for the Development of Soybean Oil-Based Non-Isocyanate Polyurethane Foams

Innovative design and green synthesis of bio-based non-isocyanate polyurethanes: Efficient combination of cardanol and carbon dioxide with high fire safety and robust adhesion

Introducing the Reversible Reaction of CO 2 with Diamines into Nonisocyanate Polyurethane Synthesis

Synthesis and characteristics of nonisocyanate polyurethane composed of bio‐based dimer diamine for supercritical CO2 foaming applications

Catalytic Synthesis of Carbonated Soybean Oil

Isocyanate- and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide

Chemically Recyclable and Mechanically Robust Non-isocyanate Polyurethane from Resveratrol

Progress in non-isocyanate polyurethanes synthesized from cyclic carbonate intermediates and di- or polyamines in the context of structure–properties relationship and from an environmental point of view

Synthesis of non‐isocyanate polyurethanes with high‐performance and self‐healing properties

Bio-based non-isocyanate polyurethane with closed-loop recyclability and its potential application

Enhanced Double Metal Cyanide Catalysts for Modulating the Rheological Properties of Poly(propylene carbonate) Polyols by Modifying Carbonate Contents

Preparation of non-isocyanate polyurethanes from epoxy soybean oil: dual dynamic networks to realize self-healing and reprocessing under mild conditions

Recyclable non-isocyanate polyurethanes containing a dynamic covalent network derived from epoxy soybean oil and CO 2

Progress in Study of Non-Isocyanate Polyurethane

Green synthesis of non-isocyanate hydroxyurethane and its hybridization with carboxymethyl cellulose to produce films