Abstract:This study explores the use of direct internal reforming solid oxide fuel cells (DIR‐SOFCs) for co‐generating electricity and chemicals from methane. It examines how different fuel compositions affect performance, reveals how carbon deposition impacts anode structures through advanced imaging techniques, and validates the technology's efficiency and stability at an industrial scale, paving the way for broader adoption in sustainable energy systems. The co‐generation of electricity and chemicals via direct internal reforming solid oxide fuel cells (DIR‐SOFCs) offers a promising route to carbon‐neutral energy solutions. However, challenges such as inadequate performance and fast degradation, particularly when using hydrocarbon fuels like CH4, hinder the deployment of DIR‐SOFC technology. This study addresses three critical issues: the effect of fuel composition on electrochemical properties, the mechanisms and microstructural impacts of carbon deposition, and the practical feasibility of DIR‐SOFCs at an industrial scale. First, comprehensive polarization and impedance analyses are conducted to assess the impact of varying fuel compositions—specifically p(CH4) and p(H2O)—on DIR‐SOFC performance. Second, advanced morphological characterization, machine learning‐assisted 3D reconstructions, and numerical simulations are utilized to reveal carbon deposition behavior and its effects on anode microstructures. Quantitative analysis of carbon's impact on pores, Ni, and YSZ phases provides novel insights into carbon‐induced microstructural changes. Finally, the industrial‐scale co‐generation of electricity and chemicals is validated, emphasizing both energy efficiency and operational stability. This study enhances the understanding of electrochemical and microstructural mechanisms, offering crucial insights for optimizing DIR‐SOFC design and operation, and laying the groundwork for their broader adoption in a carbon‐neutral future.

A scalable integrated solar device for the autonomous production of green methane

Solar fuel production from CO2 reduction in a self-biased hybrid solar-microbial device

A De Novo Auto‐Activated Solar‐Driven Biohybrid System for Hydrogen Production in Methanotrophic Cells

Thermally integrated photoelectrochemical devices with perovskite/silicon tandem solar cells: a modular approach for scalable direct water splitting

Efficient solar-to-acetate conversion from CO2 through microbial electrosynthesis coupled with stable photoanode

Spontaneous Solar Syngas Production from CO2 Driven by Energetically Favorable Wastewater Microbial Anodes

Scalable Electro‐Biosynthesis of Ectoine from Greenhouse Gases

20% Efficient Solar CO2 Electrolysis with Earth-Abundant Materials Enabled by Molecular Catalyst

Kilowatt-scale solar hydrogen production system using a concentrated integrated photoelectrochemical device

Hybrid photoelectrochemical and photovoltaic cells for simultaneous production of chemical fuels and electrical power

A highly integrated, stand-alone photoelectrochemical device for large-scale solar hydrogen production

Production of Sustainable Methane from Renewable Energy and Captured Carbon Dioxide with the Use of Solid Oxide Electrolyzer: A Thermodynamic Assessment

Solar-Driven Methanogenesis through Microbial Ecosystem Engineering on Carbon Nitride

CO 2 conversion to solar fuels and chemicals: Opening the new paths

Synergies between Direct Air Capture Technologies and Solar Thermochemical Cycles in the Production of Methanol

Renewable gases production coupled to synthetic wastewater treatment through a microbial electrolysis cell

Realization of a photoelectrochemical cascade for the generation of methanol, a liquid solar fuel

Hybrid Bioinorganic Approach to Solar-To-Chemical Conversion

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells

A New Artificial Photosynthetic System Coupling Photovoltaic Electrocatalysis with Solar Heating Catalysis