Abstract:The increase in operating temperature contributes to improving the performance and fuel utilization efficiency of gas turbines. However, it also places thermal barrier coatings (TBCs) in a more demanding working environment, requiring higher sintering resistance and better mechanical properties. In the present study, HfO2 was introduced into the dual-phase LaYbZr2O7 system as a doping oxide to form the LaYb(HfxZr1-x)(2)O-7 system. The research concentrated on its phase composition, mechanical properties, and thermophysical properties. The results show that substituting Hf for Zr does not alter the dual-phase structure of the system. The mutual inhibition between the two phases and the inherent material-binding capability of Hf further reduce the grain size compared to pure LYZO. Additionally, the presence of Hf reduces the tendency of Frenkel defect formation and cation migration frequency, effectively inhibiting ion diffusion and thereby suppressing the densification and shrinkage trends of the material. The system retains relatively high hardness, fracture toughness, and low elastic modulus of the LYZO matrix, with a decrease in thermal conductivity and an increase in infrared reflectivity. These results suggest that Hf doping enhances the sintering resistance of LYZO material, making them promising for high-temperature TBCs. Our study presents a viable approach to enhance the sintering resistance of LYZO, and this methodology can be extrapolated to other rare-earth zirconates.

Study on La2(Hf1-xTix)2O7 (x ≤ 0.20) pyrochlores for potential thermal/environmental barrier coating applications

Preparation, Characterization, And Thermophysical Properties Of (La0.95sr0.05)(2)Ce2o6.95 Ceramic For Thermal Barrier Coatings

Lu4Hf3O12 ceramics as potential top-coat materials for thermal/environmental barrier coatings

Study on properties of Hf6Ta2O17/Ta2O5 system: A potential candidate for environmental barrier coating (EBC)

High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties

Thermophysical Properties of a Novel High Entropy Hafnate Ceramic

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

Preparation and characterization of a novel monazite-type high-entropy (La1/7Ce1/7Pr1/7Nd1/7Sm1/7Eu1/7Gd1/7)PO4 for thermal/environmental barrier coatings

Influence of B-site substituent Ce on thermophysical, oxygen diffusion, and mechanical properties of La2Zr2O7

Lanthanum–titanium–aluminum oxide: A novel thermal barrier coating material for applications at 1300°C

A promising material for thermal barrier coating: Pyrochlore-related compound Sm 2 FeTaO 7

Tuning stoichiometry of high‐entropy oxides for tailorable thermal expansion coefficients and low thermal conductivity

Sintering resistance and phase stability of (Y0.2La0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 for ultra-high temperature thermal barrier coatings

Mechanical and Thermal Properties of Fine-Grained Quasi-Eutectoid (la1−yb )2zr2o7 Ceramics

A new class of high-entropy fluorite oxides with tunable expansion coefficients, low thermal conductivity and exceptional sintering resistance

Outstanding sintering resistance in pyrochlore-type La<sub>2</sub>(Zr<sub>0.7</sub>Ce<sub>0.3</sub>)<sub>2</sub>O<sub>7</sub > for thermal barrier coatings material

A novel dual-phase high-entropy (La0.2Nd0.2Gd0.2Er0.2Yb0.2)2Zr2O7 ceramic for thermal barrier coatings applications: Preparation, microstructure, and thermo–physical properties

Phase Variation and Thermophysical Properties of La2Hf2O7 with Alumina Addition

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Outstanding sintering resistance in pyrochlore-type La2(Zr0.7Ce0.3)2O7 for thermal barrier coatings material

Phase, compositional, structural, and chemical stability of La2Ce2O7 after high temperature heat treatment