Abstract:The contamination of water resources by emerging contaminants, such as heavy metals and textile effluents, poses significant ecological and human health risks. Conventional effluent treatment plants may not effectively degrade all types of pollutants, resulting in the contamination of natural water resources. Photocatalysis, specifically the photo-Fenton reaction, has emerged as an efficient sustainable cost-effective method for the removal of pollutants. In this study, three batches (CF-1, CF-2, and CF-3) of copper ferrite nanoparticles (NPs) were synthesized and used as photocatalysts for the degradation of methylene blue (MB) dye and reduction of hexavalent chromium (Cr(VI)) under visible light. The CF-1, CF-2, and CF-3 required (90, 75, and 60 min.) different periods to reach a nearly similar degradation percentage, i.e., 90%, wherein the CF-3 batch demonstrated better catalytic activity. The successful synthesis of copper ferrite NPs was confirmed by XRD analysis which reveals the CuFe 2 O 4 phase. With the increased concentration of copper, the formation of the CuO phase alongside the CuFe 2 O 4 phase was observed. The CF-3 catalyst had a surface area of 44.496 m 2 /g according to BET studies. The catalyst exhibited a pore radius of 19.175 Å and an adsorption pore volume of 0.109 cc/g, as determined by the BJH method. TEM micrographs showed spherical-shaped NPs with sizes ranging from 55 to 60 nm. The photo-Fenton process was optimized by varying dye concentration, pH, catalyst, and hydrogen peroxide (H 2 O 2 ) dosages for MB degradation. The scavenger study reveals the contribution of the •OH radical over •O 2 − radical in the photo-Fenton process for MB degradation. The reduction of Cr(VI) was optimized by adjusting pH and Cr load. The CF-3 catalyst exhibited almost complete degradation of MB (32 mg/L) within 60 min and reduction of Cr(VI) (100 mg/L) within 20 min. The good reusability of the catalyst exhibits 71.4% MB degradation after four cycles and 78.34% Cr(VI) reduction after five cycles. The regression coefficient ( R 2 ) of the pseudo-second-order reaction was close to 1 and higher than the pseudo-first-order reaction. The catalyst achieved 0.0540 and 0.1047 1/min kinetic constant at pseudo-first-order reaction, while 0.0614 and 0.0497 L/mg.min kinetic constant was achieved at pseudo-second-order reaction for MB degradation and Cr(VI) reduction. These kinetic studies proved that the dye degradation and chromium reduction follow the pseudo-second-order reaction ( R 2 ). The overall study demonstrates the promising potential of magnetic CF-3 nanoparticles as efficient catalysts for industrial applications in dye degradation and Cr(VI) reduction.

Magnetically separable rare earth metal incorporated CdFe 2 O 4 photocatalyst for degradation of cationic and azo dyes

Solvothermal synthesis of nanoscale disc-like gadolinium doped magnesium zirconate for highly efficient photocatalytic degradation of rhodamine B in water

Sunlight-driven photocatalytic degradation of organic pollutant in an aqueous medium by Gd-doped CuO nanocatalyst

Structure-led manifestation of photocatalytic activity in magnetically recoverable spinel CuFe 2 O 4 nanoparticles and its application in degradation of industrial effluent dyes under solar light

Pure and Ce-doped spinel CuFe2O4 photocatalysts for efficient rhodamine B degradation

Advanced photocatalytic degradation of textile dyes and removal of heavy metal ions from MFe2O4 using photo-Fenton mechanism

Eco-friendly dye degradation: advanced Gd-Ni co-doped Ba-hexaferrite photocatalyst for methyl green removal

Solar light driven enhanced in photocatalytic activity of novel Gd incorporated ZnO/SnO2 heterogeneous nanocomposites

Yttrium doped magnesium ferrite nanoparticles: a potential solar light driven photocatalyst for deterioration of hazardous dyes

Investigation on Structural, Morphological, Optical, Magnetic properties of CdO-CoFe 2 O 4 nanocomposites and their Photocatalytic Application

Catalytic and kinetic studies of CuFe2O4 as a superior heterogeneous nanocatalyst for dye degradation and Cr(VI) reduction

Interface engineering of a magnetic 2D-C3N4/Fe2O3/NiFe-LDH heterostructure for efficient photocatalytic degradation of methylene blue and rhodamine B dyes under visible light

An efficient and magnetically recoverable g-C3N4/ZnS/CoFe2O4 nanocomposite for sustainable photodegradation of organic dye under UV-visible light illumination

Fabrication of magnetic recoverable Fe3O4/TiO2 heterostructure for photocatalytic degradation of rhodamine B dye

Hydrothermal synthesis of cadmium sulfide decorated reduced graphene oxide photocatalyst for the degradation of photostable naphthol blue black dye

Fe3O4-CdO Nanocomposite for Organic Dye Photocatalytic Degradation: Synthesis and Characterization

Unveiling the synthesis of highly efficient cerium-doped zinc nanoferrites anchored over graphitic carbon nitride for enhanced photocatalytic water purification implications

GCN/CuFe2O4/SiO2 photocatalyst for photo-Fenton assisted degradation of organic dyes

Strategies for ameliorating the photodegradation efficiency of Mn-doped CdAl2O4 nanoparticles for the toxic dyes under visible light illumination

Design and synthesis of high performance magnetically separable exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell nanoparticles: a novel and eco-friendly photocatalyst toward removal of organic pollutants from water

Highly efficient photocatalyst fabricated from the recycling of heavy metal ions in wastewater for dye degradation