Abstract:Abstract The aim of this article was to discuss the modeling and control method of quadrotor unmanned aerial vehicle (UAV). In the process of modeling, mechanism modeling and experimental testing are combined, especially the motor and propeller are modeled in detail. Through the understanding of the body structure and flight principle of the quadrotor UAV, the Newton–Euler method is used to analyze the dynamics of the quadrotor UAV, and the mathematical model of the UAV is established under the small angle rotation. Process identifier (PID) is used to control it. First, the attitude angle of the model is controlled by PID, and based on this, the speed in each direction is controlled by PID. Then, the PID control of the four rotor aircraft with the center of gravity offset is simulated by MATLAB. The results show that the pitch angle and roll angle can be controlled by 5 degrees together without center of gravity deviation, and the PID can effectively control the control quantity and achieve the desired effect in a short time. Classical BP algorithm, classical GA-BP algorithm, and improved GA-BP algorithm were trained, respectively, with a total of 150 sets of training data, training function uses Levenberg-Marquardt (trainlm), and performance function uses mean squared error (MSE). In the background of the same noise, the improved GA-BP algorithm has the highest detection rate, classical GA-BP algorithm is the second, and classical BP algorithm is the worst. The simulation results show that the PID control law can effectively control the attitude angle and speed of the rotor UAV in the case of center of gravity deviation.

Analysis and Control of a Planar Quadrotor

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

Internal and External Disturbances Aware Motion Planning and Control for Quadrotors

Full control of a quadrotor using parameter-scheduled backstepping method: implementation and experimental tests

Review: Modeling and Classical Controller Of Quad-rotor

Linear Model Predictive Control for Quadrotors with An Analytically Derived Koopman Model

Quadrotor Aircraft Design Based on the K60 Controller

A Comparative Study Between a Classical and Optimal Controller for a Quadrotor

Modeling, Control and Human-In-The-Loop Stability Analysis of an Elastic Quadrotor

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Constrained anti-disturbance control for a quadrotor based on differential flatness

Neural Network Based Model Predictive Control for a Quadrotor UAV

Nonlinear Controller Design for a Quadrotor with Inverted Pendulum

Robust Hybrid Nonlinear Control Systems for the Dynamics of a Quadcopter Drone

Dynamics Modeling and Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle

Research on PID Control of Quadrotor Drones Based on MATLAB

Koopman-LQR Controller for Quadrotor UAVs from Data

Quadrotor Trajectory Tracking Using Linear and Nonlinear Model Predictive Control

Geometric Nonlinear PID Control of a Quadrotor UAV on SE(3)

Modeling and PID control of quadrotor UAV based on machine learning

Quadcopter Trajectory Tracking Control Based on Flatness Model Predictive Control and Neural Network