Abstract:The early condition-based assessment of civil infrastructures plays an essential role in extending their service life, preventing undesirable sudden failures, and reducing maintenance and rehabilitation costs. One of the most commonly used and fastest nondestructive testing (NDT) techniques is infrared thermography (IRT), which has emerged as a powerful method for assessing general concrete quality and detecting subsurface damage in structural members. Nevertheless, the accurate detection and classification of localized defects is still a challenging task to achieve. The contribution made by enhancing defect detection using two-dimensional (2D) wavelet transformation (WT) as a post-processing method, however, has received little attention within the field of active IR thermography. In this study, we explored the use of continuous wavelet transform (CWT) to visualize how the wavelet function at different frequencies could enhance the damage features of thermal images. A concrete slab under an applied heat flux was tested experimentally by an IR camera with well-controlled excitation sources. The qualitative visualization of thermograms was translated into quantitative results by extracting, processing, and post-processing the values assigned to the pixels in the thermal images. With the assumption of there being no oriented damage features, an isotropic (non-directional) Mexican hat wavelet was utilized as the mother wavelet. The experimental results showed that the 2D-CWT method achieved strong detection performance in extracting discriminatory features (defective areas) from the acquired thermal images. Compared with raw thermograms, the resultant CWT-transformed images were less affected by the non-uniform heating effect, and the boundaries of the defects contrasted more strongly. The 2D-CWT method demonstrates good sensitivity when an appropriate wavelet type and scale factor are chosen. Due to the desire to detect localized defects, adjusting the scale factor of the wavelet is important to improve the efficiency of detection as lower scale factors provide the finer details of thermal images, whereas higher scale factors provide the general outline of internal defects. The findings of this study represent a further step toward improving thermographic data for more precise defect-detection imaging, and principally for large concrete structures, that can be verified easily using other NDT surveys.

Application of Plane Wave Imaging and Processing for Measurement of Reflectors in Concrete

Crack Detection and Quantification for Concrete Structures Using UAV and Transformer

A Three-Step Computer Vision-Based Framework for Concrete Crack Detection and Dimensions Identification

Imaging of vertical surface-breaking cracks in concrete members using ultrasonic shear wave tomography

Using the Corner Reflection for Depth Evaluation of Surface Breaking Cracks in Concrete by Ultrasound

Non-Destructive Inspection of Concrete Structures by Ultrasonic Sensor Based on a Frequency Analysis

Concrete Crack Assessment Using Digital Image Processing and 3D Scene Reconstruction

Detection of cracks in concrete using near-IR fluorescence imaging

An Integrated Framework for Image Acquisition, Processing, and Analysis Procedures for Automated Damage Evaluation of Concrete Surfaces

Localization and Size Quantification of Surface Crack of Concrete Based on Rayleigh Wave Attenuation Model

Structural health monitoring: detection of concrete flaws using ultrasonic pulse velocity

Development of a novel approach to detect damage in concrete structures with millimeter wave radar assessment system

Ultrasonic computed tomography-based internal-defect detection and location of underwater concrete piers

Image-Based Automated Width Measurement of Surface Cracking

Analysis of coherent surface wave dispersion and attenuation for non-destructive testing of concrete

Application Research on Surface Wave Technique in Crack Depth Detection of Hydraulic Concrete

The Application of Two-Dimensional Continuous Wavelet Transform Based on Active Infrared Thermography for Subsurface Defect Detection in Concrete Structures

Simulations and experimentation of ultrasonic wave propagation and flaw characterisation for underwater concrete structures

Investigation of the Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry, and Fiber Optic Sensing

Characterization of ultrasonic Rayleigh surface waves in asphaltic concrete

Concrete damage evolution analysis by backscattered ultrasonic waves