Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Recent research progress on phase change materials for thermal management of lithium-ion batteries

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Phase change materials for lithium-ion battery thermal management systems: A review

Phase Change Materials Application in Battery Thermal Management System: A Review

Effects of Different Phase Change Material Thermal Management Strategies on the Cooling Performance of the Power Lithium Ion Batteries: A Review

Porous-Material-Based Composite Phase Change Materials for a Lithium-Ion Battery Thermal Management System

Advanced thermal management system driven by phase change materials for power lithium-ion batteries: A review

Thermal management technology of power lithium-ion batteries based on the phase transition of materials: A review

Recent Progresses of Battery Thermal Management Systems Based on Phase Change Materials

A comprehensive review of composite phase change material based thermal management system for lithium-ion batteries

Thermophysical exploration: State-of-the-art review on phase change materials for effective thermal management in lithium-ion battery systems

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review

Research Progress of Enhancing Battery Safety with Phase Change Materials

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

A review on thermal management performance enhancement of phase change materials for vehicle lithium-ion batteries

Impact of phase change material-based heatsinks on lithium-ion battery thermal management: A comprehensive review

Progress in Application of Phase Change Materials in Battery Module Thermal Management System

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Investigation of the thermal management potential of phase change material for lithium-ion battery

Passive cooling of lithium-ion batteries based on flexible phase change materials: Molecular structure, interactions and mechanistic aspects

Experimental Investigation on Battery Thermal Management Using Phase Change Materials with Different Arrangement Schemes