Abstract:Sidewall rupture of lithium-ion batteries plays an important role in thermal runaway (TR) propagation because flame burst from the side of cell can directly heat adjacent cells. However, the understanding of sidewall rupture in high specific energy cells under mechanical abuse conditions remains limited. In this work, nail penetration is adopted as a trigger method of TR of 21700-format cylindrical cells with high specific energy (257.0 W∙h/kg). The effects of test parameters including nail diameter, nail speed, penetrating location, penetrating depth, and state of charge on likelihood and severity of thermal runaway and sidewall rupture behaviour were investigated. A series of equipment including high-definition cameras, thermal imaging camera, X-ray computed tomography (CT), cycler and electronic balance were adopted to reveal the behaviour and the mechanism of TR and sidewall rupture. Discussion on CT scan and fire behaviour provides new perspectives for understanding sidewall rupture and TR mechanisms in high specific energy cells. The results show that the mean mass loss ratio of the cell with 100% SoC is greater than 45% under each test condition, and the maximum of them is as high as 62.5% when penetrating off-centre from the cell bottom and with a penetrating depth of 10 mm. The likelihood of sidewall rupture increases with the increasing nail speed, nail diameter, penetrating depth and state of charge when penetrating from the top cover of the cell, but it is little affected by the penetrating depth and nail diameter for penetrating from the bottom of the cell. For the first time such a relationship is presented. The root-cause analysis for the sidewall rupture of the cell has been discussed, which highlights the three key factors, including the casing strength, the internal pressure, and the opening area of the venting disk.

Laser-induced thermal runaway dynamics of cylindrical lithium-ion battery

Numerical Study on the Use of Emergency Cooling During the Process of Lithium-Ion Battery Thermal Runaway

Enhancing thermal runaway characterization in NMC811 lithium-ion batteries through laser-induced triggering

Effect of thermal impact on the onset and propagation of thermal runaway over cylindrical Li-ion batteries

Analysis of Thermal Runaway in Pouch-Type Lithium-Ion Batteries Using Particle Image Velocimetry

Comprehensive analysis of thermal runaway and rupture of lithium-ion batteries under mechanical abuse conditions

Comparative analysis of thermal runaway characteristics of lithium‐ion battery under oven test and local high temperature

Influencing factors of lithium-ion battery thermal runaway in confined space

Thermal Runaway Analysis of a Lithium Ion Battery under Two Different Heating Modes

Role of Heat Release from Inter-Electrode Chemical Crosstalk in Thermal Runaway Propagation Characteristics of Lithium-Ion Battery Modules

Thermal Runaway of Lithium-Ion Batteries Without Internal Short Circuit

Probing the Thermal Runaway Triggering Process Within a Lithium-Ion Battery Cell with Local Heating

Thermal runaway and fire behavior investigation of lithium ion batteries using modified cone calorimeter

Model and Experiments to Investigate Thermal Runaway Characterization of Lithium-Ion Batteries Induced by External Heating Method

Thermal Runaway and Fire Behaviors of Large-Scale Lithium Ion Batteries with Different Heating Methods

Effects of Trigger Method on Fire Propagation during the Thermal Runaway Process in Li-ion Batteries

Comparative Study on the Transversal/lengthwise Thermal Failure Propagation and Heating Position Effect of Lithium-Ion Batteries

Analysis of thermal runaway propagation characteristics of lithium-ion battery module under local high temperature

Modeling the Propagation of Internal Thermal Runaway in Lithium-Ion Battery

Investigating the Thermal Runaway Features of Lithium-Ion Batteries Using a Thermal Resistance Network Model

Investigating the Relationship Between Internal Short Circuit and Thermal Runaway of Lithium-Ion Batteries under Thermal Abuse Condition