Abstract:Clinical application of bare metal stents is constrained by the occurrence of instent restenosis, mainly due to the complex biomechanical environment in the body. Numerical simulation method was used to evaluate the effect of plaque composition on stent performance in a carotid artery. CT angiography (CTA) data were used as a reference, and zero-load state of the carotid artery was used to establish a 3D stenotic artery model. Different plaque compositions, calcified and hypo-cellular were defined in Model 1 and Model 2, respectively. Interactions between the stents and arterial tissues within the stent crimping-expansion process were analyzed to explore the effects of plaque composition on the mechanical parameters of carotid stents. Goodman diagram and fatigue safety factor (FSF) were analyzed to explore the effects of plaque composition on fatigue performance of a carotid stent in the stent service process. In the stent crimping-expansion process, the von Mises stress in the stent and the dog-boning ratio in Model 1 were higher than that in Model 2. The calcified plaque prevented the stent from expanding the stenotic vessel to a pre-set diameter. Thus, the risk of rupture in the calcified plaque was higher than that in the hypo-cellular plaque. Plaque also affected the stress/strain in the vessel wall, which was observed to be lower in Model 1 than in Model 2. This indicated that calcified plaque could decrease the stress-induced injury of arterial tissues. Within the stent service process, the stents used in these two models were predicted to not fail under fatigue rupture as calculated by the Goodman diagram. Additionally, the points closer to the fatigue limit were generally observed at the inner bend of the stent crowns. The FSF of the stent in Model 1 was lower than that in Model 2. The stent operating in the presence of calcified plaques suffered high risk of fractures. Reliability and fatigue performance of the stent were found to be associated with plaque composition. Hence, this study may provide stent designers an approach toward enhancing the mechanical reliability of a stent.

Biomechanical analysis of nickel-titanium (NiTi)–cobalt-chromium (CoCr) hybrid-braided dense-mesh stents for carotid artery stenosis

Finite element analysis of braided dense-mesh stents for carotid artery stenosis

Delivery and release of nitinol stent in carotid artery and their interactions: a finite element analysis.

Effect of Plaque Composition on Biomechanical Performance of a Carotid Stent: Computational Study

The FEM simulation of mechanical properties characterization of the stent under the quasi-static loading/unloading

Mechanical Characterizations of Braided Composite Stents Made of Helical Polyethylene Terephthalate Strips and NiTi Wires.

Multi objective design optimization of self-expandable nitinol braided stents

The Optimal Structural Analysis of Cobalt-Chromium Alloy (L-605) Coronary Stents.

Improvement of TiN coating on comprehensive performance of NiTi alloy braided vascular stent

Testing and analysis of anti-compression properties of Ni-Ti alloy superelastic stent

MECHANICAL CHARACTERIZATION OF BRAIDED SELF-EXPANDING STENTS: IMPACT OF DESIGN PARAMETERS

Mechanical Property Analysis and Design Parameter Optimization of a Novel Nitinol Nasal Stent Based on Numerical Simulation

Analysis of the Whole Implementation Process and Optimization of a Nitinol Superelastic Stent

Mechanical Property Analysis of Nitinol Defective Stent under Uniaxial Loading/Unloading

Design and characterization of a novel nickel-free cobalt-base alloy for intravascular stents.

Mechanical behavior of deformed intravascular NiTi stents differing in design. Numerical simulation

In-Vitro Investigation on the Tribological Properties of Nickel-Titanium (NiTi) Alloy Used in Braided Vascular Stents

Braided Composite Stent for Peripheral Vascular Applications

Critical Parameters for the Properties of Poly (l‐Lactic Acid) Mixed‐Braided Stent: Monofilaments Diameter and Friction Coefficient

Finite Element Analysis on the Crimped Mechanical Behavior of Coronary Stents

Mechanical Behavior of Polymer Braided Stent at Rapid Radial Loading