Synchronous Rectification Based on Resonant Inductor Voltage for CLLC Bidirectional Converter
Ning Chen,Min Chen,Bodong Li,Xiaoqing Wang,Xinnan Sun,Dongbo Zhang,Feng Jiang,Junfei Han
DOI: https://doi.org/10.1109/tpel.2021.3100154
IF: 5.967
2021-01-01
IEEE Transactions on Power Electronics
Abstract:Synchronous rectification (SR) is an effective method to reduce the secondary side conduction loss of CLLC bidirectional resonant converter and improve its efficiency, but the SR driving signal in CLLC converter is hard to determine. Existing SR signal generating methods can be divided into three categories: theoretical calculation, voltage detection, and current detection. Compared with the other two methods, the current detection method has wider applicability and is insensitive to parasitic parameters, but usually requires lossy, bulky and costly current sensors, increasing the cost and size of the converter. This article proposed a SR scheme based on resonant inductor voltage. The polarity of the resonant current is obtained indirectly through the inductor voltage, thereby avoiding the use of current sensors. To handle the false pulses problem caused by parasitic oscillation, a corresponding SR control strategy is proposed. The SR driving signal is then adjusted according to the delay and transient requirements. Experimental results on a 380V/270V 3kW CLLC converter prototype were presented to verify the effectiveness of the proposed SR method.