Abstract:The present study proposes a new efficient and robust algorithm for multi-objectives topology optimization of heat transfer surfaces to achieve heat transfer enhancement with a less pressure drop penalty based on a continuous adjoint approach. It is achieved with a customized OpenFOAM solver, which is based on a volume penalization method for solving a steady and laminar flow around iso-thermal solid objects with arbitrary geometries. The fluid-solid interface is captured by a level-set function combined with a newly proposed robust reinitialization scheme ensuring that the interface diffusion is always kept within a single local grid spacing. Adaptive mesh refinement is applied in near-wall regions automatically detected by the level-set function to keep high resolution locally, thereby reduces the overall computational cost for the forward and adjoint analyses. The developed solver is first validated in a drag reduction problem of a flow around a two-dimensional cylinder at the Reynolds numbers of 10 and 40 by comparing reference data. Then, the proposed scheme is extended to heat transfer problems in a two-dimensional flow at the Prandtl number of 0.7 and 6.9. Finally, three-dimensional topology optimization for multi-objective problems is considered for cost functionals with different weights for the total drag and heat transfer. Among various solutions obtained on the Pareto front, 4.0% of heat transfer enhancement with 12.6% drag reduction is achieved at the Reynolds number of 10 and the Prandtl number of 6.9. Moreover, the optimization of a staggered pin-fin array demonstrates that the optimal shapes and arrangement of the fins strongly depend on the number of rows from the inlet. Specifically, the pin-fins in the first and third rows extended in the upstream direction further enhance heat transfer, while the fins in the second row vanish to reduce pressure loss.

Design of metamaterial-based heat manipulators using isogeometric level-set topology optimization

Level set topology optimization of metamaterial-based heat manipulators using isogeometric analysis

Data-Driven Design of Thermal-Mechanical Multifunctional Metamaterials

Design of metamaterial-based heat manipulators by isogeometric shape optimization

A stabilized parametric level-set XFEM topology optimization method for thermal-fluid problem

Topology Optimization of Transient Nonlinear Heat Conduction Using an Adaptive Parameterized Level-Set Method

Level set methods for gradient-free optimization of metasurface arrays

Topology Optimization of Multi-Material for the Heat Conduction Problem Based on the Level Set Method

Hierarchical Combinatorial Design And Optimization Of Quasi-Periodic Metamaterial Structures

Parameterized level set method based topology optimization of transient heat conduction structures

Design of thermal meta-structures made of functionally graded materials using isogeometric density-based topology optimization

Temperature-constrained Topology Optimization of Nonlinear Heat Conduction Problems.

Topology Optimization for Metamaterials with Negative Thermal Expansion Coefficients Using Energy-Based Homogenization

Sensitivity clustering-based multi-scale topology optimization method for metamaterial thermal actuators

An Efficient Robust Optimization Methodology for Metamaterial Unit Design

A level set method for topology optimization of heat conduction problem under multiple load cases

Enhancing the degrees of freedom of topology optimization via variable-porosity metal foams: Design of heat conduction paths in a volume-to-point problem

Design of multifunctional metamaterials using optimization

Multi-objective topology optimization of heat transfer surface using level-set method and adaptive mesh refinement in OpenFOAM

Systematic topology optimization of elastic metamaterials for broadband bandgaps and customized mechanical properties