Abstract:Furan is a typical heterocyclic compound in pyrolytic tar and has a strong tendency of coke deposition in thermochemical conversion, leading to catalyst deactivation for tar upgrading. The present study proposed a promising method for furan cracking and reforming using molten alkali carbonates (Li2CO3–Na2CO3–K2CO3). The results showed that a little gas was generated in the conversion process and CO dominated the gas species. In comparison to the experiment under salt-free conditions, the decarbonylation of furan in molten salt conversion was strengthened and oxygen could be removed as H2O into the liquid products. Under the catalysis of alkali metal cations, the conversion of furan to aromatic compounds was promoted at each temperature. Moreover, excess CO2 enhanced the reverse water–gas reaction, resulting in the consumption of H2 and the increase of CO in gaseous products. In addition, coke produced in molten salts was of higher reactivity and could hardly affect the stability of the molten salt system. On the basis of the good thermal conversion behavior as well as anticoking performance of molten carbonates, these findings offer a new way for the proper reforming and upgrading of furan through molten salt thermal treatment.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02463?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02463</a>.Pictures of coke deposition in the reactor during furan cracking without molten salt (Figure S1), mass loss rate of molten salt at different temperatures (Table S1), and CO2 balance during furan reforming at different conditions (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02463/suppl_file/ef0c02463_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In-Depth Experimental Study on Thermochemical Conversion of Furan in Molten Alkali Carbonates

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Studies on Pretreatment of Catalytic Cracking Slurry Oil with Added Furfural

Understanding evolution of the products and emissions during chemical activation of furfural residue with varied potassium salts

Selective conversion of lignocellulosic biomass into furan compounds using bimetal-modified bio-based activated carbon: Analytical Py-GC×GC/MS

Conversion of Xylose into Furfural over MC-SnOx and NaCl Catalysts in a Biphasic System

Pyrolyzing Renewable Sugar and Taurine on the Surface of Multi-Walled Carbon Nanotubes As Heterogeneous Catalysts for Hydroxymethylfurfural Production

Selective conversion of lignocellulosic biomass and its components into value-added furans over Al-based bimetals: Analytical Py-GC × GC/MS

Catalytic conversion of corncob and corncob pretreatment hydrolysate to furfural in a biphasic system with addition of sodium chloride

Effect of Calcination Atmosphere on the Performance of Cu/Al2O3 Catalyst for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

A solid iron salt catalyst for selective conversion of biomass-derived C5 sugars to furfural

Budget MOF-derived catalyst to realize full conversion from furfural to furfuryl alcohol

A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone

Nanoporous Cu–Al–Co Alloys for Selective Furfural Hydrodeoxygenation to 2-Methylfuran

Sulfonic polymer catalysts for converting of furfural to high-value chemicals

Catalytic Pyrolysis of Cellulose with Sulfated Metal Oxides: A Promising Method for Obtaining High Yield of Light Furan Compounds

Experimental and kinetic modeling studies of furfural pyrolysis at low and atmospheric pressures

Novel findings in conversion mechanism of toluene as model compound of biomass waste tar in molten salt

Catalytic pyrolysis of cellulose over solid acidic catalysts: an environment-friendly method for furan production