Abstract:Abstract Capillary pressure is a crucial step in reservoir properties definition and distribution during static and dynamic modelling. It is a key input into saturation height modelling (SHM) process, understanding the fluid distribution and into reservoir rock typing process. Capillary pressure models provide an insight into field dynamic for the identification of swept zones and provide another calibration besides the log calculated saturation. Capillary pressure curve tends to be more complex in carbonates in comparison to sandstone reservoirs because of post deposition processes that impact the rock flow properties, hence complex pore throat size distribution (uni-modal, bi-modal or tri-modal). Therefore, accurate determination of this property is the cornerstone in the reservoir characterization process. Capillary pressure can be obtained using several experimental techniques, such as mercury injection (MICP), centrifuge (CF) and porous plate (PP). Each method has its own inherited advantages and disadvantages. The MICP method tends to be faster, cheaper and provides a full spectrum of pore throat size of a plug. Whereas, the PP method can be carried out at reservoir conditions with minimum required corrections. In this paper, a detailed workflow for quality control capillary pressure is discussed. The workflow is sub-divided into three main parts: Instrumental and experimental level, core measurement level and logs level. Experimental level starts with proper designing the actual procedure of the capillary pressure experiment. Parameters such as pore volume, bulk volume and grain density are investigated at core measurement level. In geological-petrography montage, all petrography data; X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), thin section and computed tomography scan (CT) are used along with the capillary pressure curve for assessment. Comparing various methodologies of experimental technique carried out on twin plugs, if exist, are also investigated. The capillary pressure that passes the previous QC steps is used as input into saturation-point comparison as a logs level QC. The saturation calculated from capillary pressure is compared to log-derived water saturation eliminating any issues with porosity and permeability of the trims and provides insight to the uncertainty level in the model. As an additional step, the MICP measurements are fitted with bi-modal Gaussian basis functions with two practical benefits. First, the quality of this fitting is a useful indicator for the evaluation of pore structure complexity and the identification erroneous measurements. Second, the fitting parameters are useful inputs for geological interpretation, rock typing and SHM. This rapid and automated workflow is a useful tool for screening, processing and integration of large-scale capillary pressure data sets, a key step in integrated reservoir description, characterization and modelling.

On Correct Accounting of Capillary Forces when Simulating Oil Displacement Processes when Flooding Productive Formations

Simulation Interpretation of Capillary Pressure and Relative Permeability From Laboratory Waterflooding Experiments in Preferentially Oil-Wet Porous Media

A New Waterflood Initialization Protocol With Wettability Alteration for Pore-Scale Multiphase Flow Experiments

iSCAL for Complete Rock Characterization: Using Pore-Scale Imaging to Determine Relative Permeability and Capillary Pressure

Modeling Oil Recovery in Mixed-Wet Rocks: Pore-Scale Comparison Between Experiment and Simulation

Simultaneous determination of relative permeability and capillary pressure from an unsteady-state core flooding experiment?

Evaluation of Capillary Pressure Methods via Digital Rock Simulations

Modeling of Chemical Tracers to Estimate Oil Volume Contacted and Sweep Efficiency in Porous Media Under Countercurrent Spontaneous Imbibition

Dynamic characterization of residual oil during long-term waterflooding experiments in heterogeneous porous structures

Capillary Pressure Corrections, Quality Control and Curve Fitting Workflow

Low-Salinity Fines-Assisted Waterflooding: Multiscale Analytical and Numerical Modelling

Pore scale investigation on scaling-up micro-macro capillary number and wettability on trapping and mobilization of residual fluid

Pore Scale Modeling of Capillary Action in Determining Oil-Water Flowing by Water Flooding: A Case Study of Low-Permeability Sandstone in the Ordos Basin, Northern China

Monte Carlo Simulation of the CO2 Flooding Efficiency at a Core Scale for Different Oil Compositions

Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Development of oil extraction screening methodology taking into account innovative methods using the example of the Ukrainian field

Practical Mathematical Model for the Evaluation of Main Parameters in Polymer Flooding: Rheology, Adsorption, Permeability Reduction, and Effective Salinity.

Oil Recovery by Low-Rate Waterflooding in Low-Permeability Water-Wet Sandstone Cores

A Practical Compositional Method for Simulation of CO2 Flooding in Porous and Fractured Petroleum Reservoirs

Study on distribution characteristics of microscopic residual oil in low permeability reservoirs

Experimental Investigation of Two-Phase Flow Properties of Heterogeneous Rocks for Advanced Formation Evaluation