Abstract:The existing research on continuous structure is usually analyzed with finite element method (FEM) and granular medium with discrete element method (DEM), but there are few researches on the coupling interaction between continuous structure and discrete medium. To the issue of this coupling interaction, a multi-scale simulation method with coupled finite/discrete element model is put forward, in their respective domains of discrete and finite elements, the nodes follow force law and motion law of their own method, and on the their interaction interface, the touch type between discrete and finite elements is distinguished as two types: full touch and partial touch, the interaction force between them is calculated with linear elastic model. For full touch, the contact force is proportional to the overlap distance between discrete element and finite element patch. For partial touch, first the finite element patch is extended on all sides indefinitely to be a complete plane, the full contact force can be obtained with the touch type between discrete element and plane being viewed as full touch, then the full overlap area between them and the actual overlap area between discrete element and finite element patch are computed, the actual contact force is obtained by scaling the full contact force with a factor η which is determined by the ratio of the actual overlap area to the full overlap area. The contact force is equivalent to the finite element nodes and the force and displacement on the nodes can be computed, so the ideal simulation results can be got. This method has been used to simulate the cutter disk of the earth pressure balance shield machine (EPBSM) made in North Heavy Industry (NHI) with its excavation diameter of 6.28 m cutting and digging the sandy clay layer. The simulation results show that as the gradual increase of excavating depth of the cutter head, the maximum stress occurs at the roots of cutters on the cutter head, while for the soil, the largest stress is distributed at the region which directly contacted with the cutters. The proposed research can provide good solutions for correct design and installation of cutters, and it is necessary to design mounting bracket to fix cutters on cutter head.

Optimization of flip-flow screen plate based on DEM-FEM coupling model and screening performance of fine minerals

Study on impact mechanical characteristics and screening performance of fine coal during flip-flow screening process

Numerical Simulation and Optimization of Screening Process for Vibrating Flip-Flow Screen Based on Discrete Element Method–Finite Element Method–Multi-Body Dynamics Coupling Method

Numerical study and multi-objective optimization of flexible screening process of flip-flow screen: A DEM-FEM approach

DEM simulation of particle flow and separation in a vibrating flip-flow screen

The MFBD-DEM coupling simulation approach for the investigation of granules screening efficiency in 4-DOF Flip-Flow Screen

Application of screening using a flip-flow screen and shallow groove dense-medium separation in a steam coal preparation plant

Effect of Screen-Panel Tensile Length and Material Characteristics on Screening Performance of Flip-Flow Vibrating Screens for Dry-Screening Fine, Low-Grade Bituminous Coal

Study on Screening Probability Model and Particle-Size Effect of Flip-Flow Screen

Collaborative optimization of the wet screening process: A CFD-DEM based modeling approach with bi -objective optimization

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Simulation of Flip-Flow Screening Adhesive Organic Fertilizer Particles Based on DEM-MBD Coupling Method

Research on screening effect and time-frequency characteristics of screen surface with additional striking beam

Numerical investigation on dynamic response of the screen mesh in vibrating screening through DEM-FEM co-simulation

Optimization of key link parameters and mechanism of the jet-stirring synergistic column flotation method

Dynamic characteristics of LIWELL flip-flow screen panel and particle movement

Multi-scale simulation method with coupled finite/discrete element model and its application

Comparison of flip-flow screen and circular vibrating screen vibratory sieving processes for sticky fine particles

Study on the effect of flow field optimization on flotation efficiency

DEM study of particles flow on an industrial-scale roller screen

Precision Compound Sand Control Screen Internal Flow Field of the CFD Simulation