Abstract:Under extreme working conditions such as high-speed driving on roads with a large road surface unevenness coefficient, turning on a road with a low road surface adhesion coefficient, and emergency acceleration and braking, a vehicle’s stability deteriorates sharply and reduces ride comfort. There is extensive existing research on vehicle active suspension control, trajectory tracking, and control methods. However, most of these studies focus on conventional operating conditions, while vehicle stability analysis under extreme operating conditions is much less studied. In order to improve the stability of the whole vehicle under extreme operating conditions, this paper investigates the stability of a vehicle under extreme operating conditions based on linear quadratic regulator (LQR) control. First, a seven degrees of freedom (7-DOF) dynamics model of the whole vehicle is established based on the use of electromagnetic active suspension, and then an LQR controller of the electromagnetic active suspension is designed. A joint simulation platform incorporating MATLAB and CarSim was built, and the CarSim model is verified by real vehicle tests. Finally, the stability of the vehicle under four different ultimate operating conditions was analyzed. The simulation results show that the root mean square (RMS) values of body droop acceleration and pitch angle acceleration are improved by 57.48% and 28.81%, respectively, under high-speed driving conditions on Class C roads. Under the double-shift condition with a low adhesion coefficient, the RMS values of body droop acceleration, pitch acceleration, and roll angle acceleration are improved by 58.25%, 55.41%, and 31.39%, respectively. These results indicate that electromagnetic active suspension can significantly improve vehicle stability and reduce driving risk under extreme working conditions when combined with an LQR controller.

Pitch Control by LQR for Fixed Wing Aircraft During Microburst Encounter

Application of Iterative Learning Tuning to a Dragonfly-Like Flapping Wing Micro Aerial Vehicle

Research on Longitudinal Control Algorithm for Flying Wing UAV Based on LQR Technology

Loss of Control Prevention of an Agile Aircraft: Dynamic Command Saturation Approach

Flight Dynamic Characteristics of Wide-Body Aircraft with Wind Gust and Turbulence

Vehicle Stability Analysis under Extreme Operating Conditions Based on LQR Control

Robust Sliding Mode Control for Air-to-Air Missile

Regaining Loss in Dynamic Stability after Control Surface Failure for an Air-Breathing Hypersonic Aircraft Flying At Mach 8.0

Attitude protection control for stick-oprrated aircraft

Experimental study of microburst effects on airfoil for micro/unmanned aerial vehicle applications

Aeroservoelastic model based active control for large civil aircraft

Coordinated Turn of Fixed-Wing Aircraft Under Wind Interface on Integral Backstepping

Robust higher-order sliding mode control for an air-breathing hypersonic vehicle model

Disturbance Observer-Based Backstepping Terminal Sliding Mode Aeroelastic Control of Airfoils

Post-stall Flight Dynamics of Commercial Transport Aircraft Configuration: A Nonlinear Bifurcation Analysis and Validation

Impact of Wind and Wind Shear on Sliding Mode Controller Assisted Aircraft Spin Recovery

Dynamic characteristics analysis and robust transition control of tail-sitter VTOL UAVs

Control Simulation of Flapping-Wing Micro Aerial Vehicle Based on Multi-Level Optimization Model Predictive Control

Incremental Sliding Mode Control for Predefined-Time Stability of a Fixed-Wing Electric Vertical Takeoff and Landing Vehicle Attitude Control System

Design and Experimental Validation of a Robust Trajectory Tracking Control Scheme for Small Fixed-wing Unmanned Aerial Vehicles

Modelling and Control of an Urban Air Mobility Vehicle Subject to Empirically-Developed Urban Airflow Disturbances