Abstract:Manganese (Mn) concentrations in many groundwater supplies exceed the national drinking water limit of 0.05 mg/L, exacerbating regional water scarcity and potential ecological issues. Adsorption, as an efficient process for wastewater treatment. For the adsorption process, the adsorbent was the key parameter. Manganese oxides have strong specific adsorption and catalytic oxidation capacity for Mn(II). Serpentine loading was an effective way to improve the dispersion of manganese oxides and the adsorption efficiency of heavy metals. This study aimed to remove dissolved Mn(II) from groundwater using a raw serpentine modified with manganese oxide (Srp/MO). SEM, EDS, XRD, BET and XPS were used to characterize the physicochemical properties and characteristic groups of the serpentine before and after loading. Response surface methodology (RSM) based on Box-Behnken method was used to design the experiment to optimize the effects of dosage, oscillation rate and reaction time on manganese removal. The results show that after modification, the pores of serpentine become larger, the surface becomes smooth and loose, the basic skeleton has no obvious change, the specific surface area increases, and the total pore volume decreases. The adsorption behavior of Mn(II) by Srp/MO follows Langmuir isotherm model and pseudo-second-order kinetic model. The maximum adsorption rate of Mn(II) in water by Srp/MO was 34.88 mg/g, which was 7.6 times that of the raw serpentine. The primary mechanism for Mn(II) removal by Srp/MO was based on physical adsorption and mediated by Mn 3+ /Mn 4+ species. The optimal manganese removal conditions were as follows: Srp/MO dosage 80 mg/L, oscillation rate 180 r/min, reaction time 104 min. At this time, the manganese removal rate was 99.3%, which was basically consistent with 100% predicted by the model. A regeneration study over three cycles indicated that Srp/MO possessed promising reusability potential. In conclusion, Srp/MO was an excellent adsorption material for the removal of Mn(II) in groundwater, which provides a new solution for the purification treatment of manganese containing groundwater.

Experimental and theoretical investigations into the surface chemical properties and separation of serpentine from quartz using xanthomonas campestris as a selective flocculant

Depression Mechanism of a Novel Depressant on Serpentine Surfaces and Its Application to the Selective Separation of Chalcopyrite from Serpentine

Application of exopolysaccharides synthesized by Xanthomonas campestris in an efficient separation system of refractory chalcopyrite and molybdenite

Selective flotation separation of gypsum and quartz using dodecyl amine hydrochloride as collector: Mechanism and application

Application of organic phosphonic acid dispersant in the separation and flotation of chalcopyrite and serpentine

Studies on the application of N,N-bis(phosphonomethyl)-sulfamic acid in the selective flotation separation of pyrite from serpentine

Selective Flocculation Separation of Fine Hematite from Quartz Using a Novel Grafted Copolymer Flocculant

Selective Removal of Phenanthrene from SDBS or TX100 Solution by Sorption of Resin SP850

A pre-adsorption system: The application of 8-hydroxyquinoline in the separation of specularite and chlorite

Factors affecting the selective flocculation of hydroxyapatite from quartz and/or calcite mixtures

Colloid Mill-Assisted Ultrasonic-Fractional Centrifugal Purification of Low-Grade Attapulgite and Its Modification for Adsorption of Congo Red

Study on the Reverse Flotation Separation of Smithsonite from Dolomite Using the Saponified 2-(4,4-Dimethylpentan-2-yl)-5,7,7-trimethyloctanoic Acid as a Collector

Manganese Oxide-Modified Serpentine for Manganese Removal from Groundwater: Performance and Optimization

Surface chemistry of dissolved species of cerussite and calcite and its effect on flotation performance

Effect of dissolved species of cerussite on quartz flotation in sulfidization xanthate system

Experimental and simulation study on the flotation separation of smithsonite from dolomite using phosphoryl carboxyl copolymer as a novel depressant

Efficient separation of magnesite and quartz using eco-friendly Dimethylaminopropyl lauramide experimental and mechanistic studies

Application of a novel zirconium coagulant in the coagulation-ultrafiltration process: Fluoride removal and membrane fouling alleviation

Adsorption of Trisiloxane Surfactant for Selective Flotation of Scheelite from Calcite at Room Temperature

Innovative application of sodium tripolyphosphate for the flotation separation of scheelite from calcite

Electrochemically deposited molybdenum disulfide surfaces enable polymer adsorption studies using quartz crystal microbalance with dissipation monitoring (QCM-D)