Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

Kalman-based estimation of loading conditions from ultrasonic guided wave measurements

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Structural damage detection based on Kalman filter and neutral axis location

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

An adaptive PCA‐based method for more reliable ultrasonic guided waves SHM: Data‐driven modeling and experimental validation in high attenuating medium

Mitigating the Impact of Temperature Variations on Ultrasonic Guided Wave-Based Structural Health Monitoring through Variational Autoencoders

Long-term guided wave structural health monitoring in an uncontrolled environment through long short-term principal component analysis

Kalman Filter Based Load Monitoring in Beam Like Structures Using Fibre-Optic Strain Sensors

Robust Structural Health Monitoring of CFRP Structures under Varying Loads using NSFD and Machine Learning with Combined Usage of Acceleration and Strain Data

Statistical guided-waves-based SHM via stochastic non-parametric time series models

Multi-objective sensor placement optimization in SHM systems with Kriging-based mode shape interpolation

Data-driven Framework for Forward and Inverse Problems in Guided Waves-Based Structural Health Monitoring Under Varying Environmental and Operating Conditions

Structural damage detection based on fundamental Bayesian two-stage model considering the modal parameters uncertainty

Bayesian‐optimized unsupervised learning approach for structural damage detection

Defect detection and localisation using guided wave images from array data processed by nonlinear autoregressive exogenous model and Gamma statistical operator

Structural health monitoring of cylindrical structures using guided ultrasonic waves

Evaluation of machine learning techniques for structural health monitoring using ultrasonic guided waves under varying temperature conditions

Single Atom Convolutional Matching Pursuit: Theoretical Framework and Application to Lamb Waves based Structural Health Monitoring

Reference-free absolute strain estimation using longitudinal waves and relative strain measurements

Directional wave spectrum estimation through onboard measurement data utilizing B-spline basis functions

Structural damage identification with limited modal measurements and ultra‐sparse Bayesian regression