Abstract:Two second-phases with an opposite potential difference to the α-Mg matrix may affect the discharge mechanism of magnesium (Mg) anodes for primary Mg-air cells through different micro-galvanic behaviors. Herein, using Mg–Ca- x Sn alloys anode with Mg 2 Ca and CaMgSn phases, we investigated their influence on the dissolution mode of Mg-anode during discharge state via in-situ scanning vibrating electrode technique (SVET) technology. Firstly, the peak surface positive potential of Mg–1Ca alloy only containing Mg 2 Ca phase and Mg–1Ca–1Sn alloy with CaMgSn/Mg 2 Ca phase increases multiplied by 10 during the discharge process compared to that of OCP, exhibiting accelerated anodic substrate dissolution. Moreover, Mg 2 Ca-phases can be attacked firstly while promoting the discharge of the α-Mg matrix surrounding them, leading to the preferential dissolution of grain boundaries and "chunk effects (CE)" occurrence. More CaMgSn/α-Mg couples are activated to form dispersed micro-galvanic cell islands, which also boosts the dissolution of the α-Mg matrix but reduces the area of high-intensity dissolution reaction due to CaMgSn acting as a cathode. However, excessive CaMgSn-phase generally fails to discharge effectively to reduce anode efficiency, although it can improve the self-peeling capacity of the film layer through physical detachment; in addition, with Sn content increasing to 3 wt%, the open circuit voltage of Mg–1Ca–3Sn significantly declines. Mg–1Ca-0.2Sn exhibits the highest cell voltage and anodic efficiency by introducing a tiny amount of dispersed short rod-like CaMgSn, due to the adjusted dissolution mode, enhanced electrochemical activity and inhibited CE. Finally, our study provides a universal mechanism for fabricating Mg-anode with high performance via phase composition modulation.

Investigation of the influence of voltage pulse on the initial delayed action of Mg batteries

Electrochemical behavior of Mg electrode in sodium salt electrolyte system

Effect of Negative Pulse on the Stability of Black Electrolytes for Magnesium Alloy Microarc Oxidation

Effects of Texture and Discharge Products on the Discharge Performance of Mg Anodes for Mg Air Batteries

Microstructure of Pure Magnesium and AZ31 Magnesium Alloy Anodes after Discharge/Charge Cycles for Rechargeable Magnesium Batteries

Effects of trace amounts of Sn, Ca, and Cu on the electrochemical properties and discharge performance of Mg-2Zn-1Gd-0.5Zr as an anode for Mg-air battery

Water-Activated VOPO4 for Magnesium Ion Batteries

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Effect of Gd content on the discharge and electrochemical behaviors of the magnesium alloy AZ31 as an anode for Mg-air battery

Investigation of SDS on Corrosion Behavior and Discharge Performance of AZ31B Magnesium Alloys in Aqueous Magnesium Air Batteries

Effect of sodium‐zinc EDTA and sodium gluconate as electrolyte additives on corrosion and discharge behavior of Mg as anode for air battery

Corrosion and Discharge Behavior of As‐Rolled AZ91 Magnesium Alloy after Electro‐Pulsing Treatment

High-Voltage Aqueous Magnesium Ion Batteries

The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery

Insight into interfacial processes and degradation mechanism in magnesium metal batteries

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

Direct insights into the electrochemical processes at anode/electrolyte interfaces in magnesium-sulfur batteries

Illustrating the influence of anodic/cathodic second-phases on dissolution mode via Mg–Ca–Sn alloy anodes for primary Mg-air cells

In-situ Multimodal Imaging and Spectroscopy of Mg Electrodeposition at Electrode-Electrolyte Interfaces

The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy