Abstract:The effect of rotation on a nonlocal fiber-reinforced visco-thermoelastic media was examined in this work using an modified Green and Lindsay theory (MGL). The problem was resolved by using normal mode method to derive the precise expressions of field quantities. In this technique, one gets exact solution without any assumed restrictions on the field variables. The normal mode technique is applicable to a wide range of problems in thermodynamics and thermoelasticity. Graphical representations of the thermal temperature, displacements and stresses are obtained. Comparisons of the physical quantities are shown in figures to study the effects of nonlocal parameter, rotation, viscosity and reinforcement parameters. Some special cases of interest have also been inferred from the present problem. The results indicate that rotation, nonlocal parameter, viscosity and reinforcing factors have a considerable impact on the fluctuations of the variables under consideration. These impacts are examined and described in depth.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: to study the behavior of non - local fiber - reinforced visco - thermoelastic media considering the rotation effect. Specifically, the author uses the modified Green - Lindsay theory (MGL) to explore the influence of rotation on this complex material, and verifies the influence of non - local parameters, rotation, viscosity and reinforcement parameters on the fluctuations of physical variables (such as temperature, displacement and stress) through numerical simulation. ### Core problems of the paper 1. **Rotation effect**: To study how rotation affects physical variables in non - local fiber - reinforced visco - thermoelastic materials. 2. **Non - local effect**: To explore the influence of non - local parameters on the material behavior, especially in small - scale structures. 3. **Viscosity effect**: To analyze the influence of viscosity on the dynamic response of the material. 4. **Reinforcement effect**: To study the influence of fiber - reinforcement parameters on the mechanical properties of the material. ### Research methods The author adopts normal mode analysis to solve the governing equations. This method can obtain exact solutions without assuming restrictions on field variables. By introducing the modified Green - Lindsay theory, the author derives exact expressions for describing temperature, displacement and stress, and conducts numerical simulations to verify these theoretical results. ### Main conclusions 1. **Influence of non - local parameters**: Non - local parameters significantly affect the changes of physical quantities. 2. **Influence of rotation**: Rotation has a significant impact on the changes of physical quantities, especially on the distribution of displacement, temperature and stress. 3. **Influence of viscosity**: The viscosity parameter also significantly affects the changes of physical quantities, especially in the fluctuations of stress components. 4. **Influence of reinforcement parameters**: Fiber - reinforcement parameters significantly change the physical characteristics of the material, especially in the stress distribution. ### Application prospects The results of this study can be applied to theoretical modeling to analyze the behavior of fiber - reinforced visco - thermoelastic materials under extreme conditions. In addition, these results have important application values in engineering, geophysics, earthquake estimation and other fields. ### Summary of mathematical formulas The main formulas involved in the paper include: - Constitutive equation of stress tensor: \[ (1-\varepsilon^{2}\nabla^{2})\sigma_{ij}=\left(1 + t_{0}\tau_{1}\frac{\partial}{\partial t}\right)\left[\lambda^{*}e_{kk}\delta_{ij}+2\mu^{*}T e_{ij}+\alpha^{*}(a_{k}a_{m}e_{km}\delta_{ij}+a_{i}a_{j}e_{kk})+2(\mu_{L}^{*}-\mu_{T}^{*})(a_{i}a_{k}e_{kj}+a_{j}a_{k}e_{ki})+\beta^{*}a_{i}a_{j}a_{k}a_{m}e_{km}\right]-\gamma^{*}\left(1 + t_{1}\tau_{1}\frac{\partial}{\partial t}\right)\theta\delta_{ij} \] - Definition of strain tensor: \[ e_{ij}=\frac{1}{2}(u_{i,j}+u_{j,i}),\quad e_{kk}=\frac{\partial u}{\partial x}+\frac{\partial v}{\partial y},\quad e = u_{i,i} \] - Equation of motion: \[ \sigma_{ji,j}=\rho\left(\frac{\partial^{2}u_{i}}{\partial t^{2}}+[\Omega\times(\Omega\times u)]_{i}+2(\Omega\times u_{t})_{i}\right) \]

A new model of rotating nonlocal fiber-reinforced visco-thermoelastic solid using a modified Green–Lindsay theory

Effect of Rotation on Plane Waves of Generalized Electro-Magneto-thermoviscoelasticity with Two Relaxation Times

The Impact of Rotation and Inclined Load on a Nonlocal Fiber-Reinforced Thermoelastic Half-space via Simple-phase-lag Model

On a Nonlocal Fiber-Reinforced Thermo-Visco-Elastic Solid Via Multi-Phase-Lag Model under the Influence of Gravity

The Effect of Rotation on 2-D Thermal Shock Problems for A Generalized Magneto-Thermo-Elasticity Half-Space under Three Theories

The effect of gravity on a nonlocal fiber-reinforced thermoelastic solid with reference temperature-dependent material properties via various theories

On Wave Propagation of Rotating Viscoelastic Nanobeams with Temperature Effects by Using Modified Couple Stress-Based Nonlocal Eringen's Theory.

Generalized Thermo-Microstretch Elastic Solid for Different Theories with Finite Element Method under the Influence of Gravity Field

Reflection of Magneto-Thermo-elastic Waves from a Rotating Elastic Half-Space in Generalized Thermoelasticity under Three Theories

Viscoelastic flow in rotating curved pipes

Evolution of local relaxed states and the modelling of viscoelastic fluids

TEMPERATURE-DEPENDENT PHYSICAL CHARACTERISTICS OF THE ROTATING NONLOCAL NANOBEAMS SUBJECT TO A VARYING HEAT SOURCE AND A DYNAMIC LOAD

Effect of Nonlocality and Internal Heat Source on an Initially Stressed Thermoelastic Medium Under MGL Model

A modified couple stress model to analyze the effect of size-dependent on thermal interactions in rotating nanobeams whose properties change with temperature

Influence of thermal load on a rotating thermoelastic medium with diffusion and double porosity

Reflection of magneto-thermo-elastic waves from a rotating elastic half-space

A GL Model on Thermo-Elastic Interaction in a Poroelastic Material Using Finite Element Method

Coupled heat and mass transfer to viscoelastic fluid flow in a rotating frame using series and numerical solutions

A Co-Rotational Based Anisotropic Elasto-Plastic Model for Geometrically Non-Linear Analysis of Fibre Reinforced Polymer Composites: Formulation and Finite Element Implementation

Rotation, Initial Stress, Gravity and Electromagnetic Field Effect on P Wave Reflection from Stress-Free Surface Elastic Half-Space with Voids under Three Thermoelastic Models

Some basic theorems on the modified Green–Lindsay model of linear generalized thermoelasticity