Abstract:Polymer 3D printing is a broad set of manufacturing methods that permit the fabrication of complex architectures, and, as a result, numerous efforts focus on formulating processible chemistries that produce desirable material behavior in printed parts. However, current resin chemistries typically result in a single fixed set of properties once fully polymerized, a fact that poses significant engineering challenges to obtaining multimaterial devices. As an alternative to single-property materials, we introduce a ternary sequential reaction scheme that exhibits diverse multimaterial properties by profoundly altering the polymer microstructure from within a single resin composition. In this system, the photodosage during 3D printing sets both the shape and extent of conversion for each subsequent reaction. This different polymerization mechanisms of the subsequent stages yield disparate crosslink densities and viscoelastic properties. As a result, our materials possess Young's Moduli spanning over three orders of magnitude (400 kPa < E < 1.6 GPa) with smooth transitions between soft and stiff regions. We successfully pattern a 500x change in modulus in under a millimeter while the sequential assembly of our polymer networks ensures robust interfaces and enhances toughness by 10x compared to the single property materials. Most importantly, the final objects remain stable to UV and thermal aging, a key limitation to applications of previous multimaterial chemistries. We demonstrate the ability to 3D print intricate multimaterial architectures by fabricating a soft, wearable braille display.

Pick and place process for uniform shrinking of 3D printed micro- and nano-architected materials

High-resolution 3D Nanoprinting Based on Two-Step Absorption Via an Integrated Fiber-Coupled Laser Diode.

Beyond 100 nm Resolution in 3D Laser Lithography: Post Processing Solutions

Progress of shrink polymer micro- and nanomanufacturing.

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Heterogeneous Growth of 3D Printed Polymer Network for Multi‐Material Integration

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

3D nanofabrication by volumetric deposition and controlled shrinkage of patterned scaffolds

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

ShrinkyKit: 3D Printing Shrinkable Adaptations for Everyday Objects

3D Microstructure Manufacture Based on Laser-Induced Thermoplastic Expansion

3D nanoprinting via spatially controlled assembly and polymerization

Refractive index matched polymeric and preceramic resins for height-scalable two-photon lithography

Reconfigurable Polymer Networks for Digital Light Processing 3D Printing

Shrinkage-Considered Mold Design for Improvement of Micro/Nano-Structured Optical Element Performance

A 3D Self-Shaping Strategy for Nanoresolution Multicomponent Architectures

One-Pot Printing of Robust Multimaterial Devices

Recent Progress of Lithographic Micro Fabrication by the Tpa-Induced Photopolymerization

Light-oriented 3D printing of liquid crystal/photocurable resins and in-situ enhancement of mechanical performance

Rapid printing of nanoporous 3D structures by overcoming the proximity effects in projection two-photon lithography

3D printing of multi-scalable structures via high penetration near-infrared photopolymerization