Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

Modeling cardiac microcirculation for the simulation of coronary flow and 3D myocardial perfusion

A comprehensive mathematical model for cardiac perfusion

Index of Microcirculatory Resistance: State-of-the-art and Potential Applications in Computational Simulation of Coronary Artery Disease

Personalized Pressure Conditions and Calibration for a Predictive Computational Model of Coronary and Myocardial Blood Flow

A geometric multiscale model for the numerical simulation of blood flow in the human left heart

A Multi‐scale Model of the Coronary Circulation Applied to Investigate Transmural Myocardial Flow

A Multi-physics Model of Flow from Coronary Angiography: Insights into Microvascular Function

Mathematical modeling of local perfusion in large distensible microvascular networks

Simulating Cardiac Fluid Dynamics in the Human Heart

Modeling Hemodynamics in Three‐Dimensional, Biomimetic, Branched, Microfluidic, Vascular Networks

Numerical modeling of hemodynamics scenarios of patient-specific coronary artery bypass grafts

An electromechanics-driven fluid dynamics model for the simulation of the whole human heart

Cardiac hemodynamics computational modeling including chordae tendineae, papillaries, and valves dynamics

A cardiac electromechanics model coupled with a lumped parameters model for closed-loop blood circulation. Part II: numerical approximation

Patient-Specific Numerical Simulations of Coronary Artery Hemodynamics and Biomechanics: A Pathway to Clinical Use

3D-0D closed-loop model for the simulation of cardiac biventricular electromechanics

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Blood flow distribution in an anatomically detailed arterial network model: criteria and algorithms

A three‐dimensional method for morphological analysis and flow velocity estimation in microvasculature on‐a‐chip

A quantitative high resolution voxel-wise assessment of myocardial blood flow from contrast-enhanced first-pass magnetic resonance perfusion imaging: microsphere validation in a magnetic resonance compatible free beating explanted pig heart model