Abstract:Over the past few years, the external quantum efficiency (EQE) of organic-inorganic hybrid perovskite light-emitting diodes (LEDs) has experienced a tremendous progress. The reported highest EQE of infrared and green perovskite LEDs has reached 21.6% and 20.3%, respectively, which is comparable to commercial organic light-emitting diodes. Even the slightly inferior blue perovskite LEDs have a recorded EQE of 12.3%. However, poor device stability is the biggest problem hindering the commercial application of perovskite optoelectronic devices, which is a severer problem in LEDs because the higher operating voltage will trigger acute ion migration. Encouragingly, however, the lifetime of perovskite LEDs has increased from the initial several seconds to over 200 hours, presenting a dramatic progress. The outstanding performance of perovskite LEDs is closely related with the excellent material properties, including tunable bandgaps, narrow full width at half maximum (FWHM), high defect tolerance, high electron/hole mobility and solution processibility. Moreover, the diversity of components and structure of perovskite makes the addition of various additives effective, enabling optimizing device performance through kinds of chemical methods. In this review, we analyzed the impacts of component and structure designing on the efficiency and stability of perovskite LEDs from the perspective of compositional designing, defect passivation and interfacial modification. We analyzed how compositional designing affects the optoelectronic properties through altering the ratio between organic and inorganic components or adding other molecules and ions to adjust the dimension of perovskites. As for defect passivation, we discussed various passivating reagents and their working mechanism. In addition, we summarized the significance of interfacial modification between different functional layers, including improving the wetting property of the substrates, achieving higher crystal quality of perovskite films, passivating the defects at the interfaces, blocking leakage current and reducing hole/electron injecting barrier. Finally, we discussed the scientific and technological challenges yet to be resolved before perovskite LEDs can be considered for commercial applications.

Stability of Perovskite Light‐Emitting Diodes: Existing Issues and Mitigation Strategies Related to Both Material and Device Aspects (Adv. Mater. 43/2022)

Stability of Perovskite Light‐Emitting Diodes: Existing Issues and Mitigation Strategies Related to both Material and Device Aspects

An Efficiency-Stability Trade-off in Perovskite LEDs

Minimising Efficiency Roll-off in High-Brightness Perovskite Light-Emitting Diodes

Improving the Operational Lifetime of Metal-Halide Perovskite Light-Emitting Diodes with Dimension Control and Ligand Engineering

Stability of Perovskite Light Sources: Status and Challenges

Stability of Electroluminescent Perovskite Quantum Dots Light‐emitting Diode

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Characterization of stability and challenges to improve lifetime in perovskite LEDs

Highly stable perovskite light-emitting diodes

Ultrastable near-infrared perovskite light-emitting diodes

Challenges and Strategies Toward Future Stable Perovskite Photovoltaics

High Performance Metal Halide Perovskite Light-Emitting Diode: From Material Design to Device Optimization

Stability Challenges for Perovskite Solar Cells

Long-term operating stability in perovskite photovoltaics

Stability of Perovskite Solar Cells: Degradation Mechanisms and Remedies

Perovskite Solar Cells: Barrier Designs in Perovskite Solar Cells for Long‐Term Stability (Adv. Energy Mater. 35/2020)

Research Progress of Composition and Structure Design in Perovskites for High Performance Light-emitting Diodes

Stability of Metal Halide Perovskite Solar Cells

Recent Advances In Photo-Stability Of Lead Halide Perovskites

Degradation and self-repairing in perovskite light-emitting diodes