Abstract:Aiming at the problems of large loss rate and high damage rate during buckwheat threshing, an inner and outer roller buckwheat thresher was designed. The device is mainly composed of an inner roller and an outer roller, the inner roller is a rod-tooth combination roller, and the outer roller is a grid roller, the inner and outer rollers can be rotated independently. The outer roller is supported on the friction wheels and the supporting wheels, and driven to rotate by the friction wheel transmission system. The compression device is installed at the top to prevent the outer roller from slipping during the rotation. During working, the materials enter between the inner and outer rollers and the separation of grains and stems under the brushing and kneading action of the inner and outer rollers takes place. In order to push the materials between the inner and outer rollers smoothly, a double spiral blade type screw feeding device was designed. By establishing a mathematical model of material pushing, the screw feeding device has a material conveying speed of 1.87 m/s and a conveying capacity of 4.29 kg/s. In order to study the threshing performance, the threshing device was installed on the basis of the Kubota 688 tracked type combine to complete a prototype of a tracked buckwheat combination harvester. Field tests show that the grain impurity rate is 6.50%, the grain damage rate is 1.42%, the threshing loss rate is 0.25%, the cleaning loss rate is 1.01%, the direct loss rate of the header is 2.43%, and the total machine harvest loss rate is 3.69% at the working speed of 0.53 m/s and the feeding rate of 0.41 kg/s. The test results provide a basis for the improvement of buckwheat mechanized harvesting machinery.

Design and construction of a manually operated castorbean-cum-sunflower seed dehuller.

Design and Fabrication of Sunflower Seed Extracting Machine

Design of Automatic Chestnut Shelling Machine

Design and Fabrication of Soyabean Screening Machine

DESIGN AND CONSTRUCTION OF A FLAX RUBBING DESEEDER

AN IMPROVED DESIGN AND CONSTRUCTION WITH PERFORMANCE EVALUATION OF A MELON SEEDS SHELLER WITH A CONTINUOUS SEPARATOR

Design of the gordon euryale seed automatic shelling machine

DEVELOPMENT OF A RUBBING THRESHER FOR SOME SEED CROPS

Development and Performance Evaluation of a Spring-Loaded Hand Operated Maize Sheller with Variable Mechanisms

DEVELOPMENT A PACKED VERTICAL DISK CORN SHELLER FOR RURAL DWELLER

Design and Performance Evaluation of Canola-Seed Cleaning Machine

Design and Experiment of a Peanut Shelling Machine

Design of the Hard Alfalfa Seed Processor

Studies on the machine of lotus seed sheller hollowly

DESIGN AND FABRICATION OF AN EXTRACTION MACHINE FOR TOMATO SEEDS

Ergonomics in developing hand operated maize dehusker-sheller for farm women

Development of walnut dehulling machine and assessment of its performance using Ethephon and Tween-80 as pre-treatments for hull loosening

Development and Performance Evaluation of a Rubbing Thresher for Sunflower Crop

DESIGN AND FIELD TEST OF A NEW COMPACT SELF-PROPELLED CABBAGE HARVESTER

Design of Corn Thresher

DESIGN OF INNER AND OUTER ROLLER BUCKWHEAT THRESHER AND FIELD TEST