Abstract:The performance of lead-acid batteries could be significantly increased by incorporating carbon materials into the negative electrodes. In this study, a modified carbon material developed via a simple high-temperature calcination method was employed as a negative electrode additive, and we have named it as follows: N-doped chitosan-derived carbon (NCC). The performance of this material was compared with a control battery containing activated carbon (AC). X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy were engaged in analyzing the crystal structure and morphology of the material. Afterwards, the electrochemical and battery performance was examined through cyclic voltammetry (CV), linear voltammetry (LSV) and constant current charge-discharge testing. Markedly, the electrode plate containing 1 wt.% NCC indicates the highest specific capacity (106.48 F g−1) as compared to the control battery, which is 1.56 times higher than the AC electrode plate and 4.75 times higher than the blank electrode plate. The linear voltammetry shows that the hydrogen precipitation current density of the 1 wt.% NCC electrode plate is only −0.028 A cm−2, a much higher value than that of the AC electrode plate. In addition, the simulated battery containing 1 wt.% NCC has a cycle life of 4324 cycles, which is 2.36 times longer than that of the same amount of additive AC battery (1834 cycles) and 5.34 times longer than that of the blank battery (809 cycles). In summary, NCC carbon has the advantage of extending the life of lead-acid batteries, rendering it a promising candidate for lead-acid battery additives.

Inhibition of irreversible sulfation of lead-acid batteries by hierarchal porous carbon with in-situ grown carbon nanotube clusters

Templated and Catalytic Fabrication of N-Doped Hierarchical Porous Carbon-Carbon Nanotube Hybrids as Host for Lithium-Sulfur Batteries.

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Sulfur impregnated N, P co-doped hierarchical porous carbon as cathode for high performance Li-S batteries

Hierarchical tubular porous carbon derived from mulberry branches for long-life lead-carbon battery

Carbon thermal shock assisted activated carbon for lead carbon batteries: Uniform loading of lead nanoparticles and pore regulation

Acid-treated multi-walled carbon nanotubes as additives for negative active materials to improve high-rate-partial-state-of-charge cycle-life of lead-acid batteries

Boosting high-rate-partial-state-of-charge performance of lead-acid batteries by incorporating trace amount of sodium dodecyl sulfate modified multi-walled carbon nanotubes into negative active materials

Suppressing Hydrogen Evolution and Eliminating Sulfation in Lead-Carbon Batteries Via Potential-Matching G-C3n4@rgo Nanosheets

Hierarchical Porous Carbon Material Regenerated from Natural Bamboo-Leaf: How to Improve the Performance of Lead-Carbon Batteries?

A Layered-Carbon/pbso4 Composite As a New Additive for Negative Active Material of Lead-Acid Batteries

Preparation of NH4Cl-Modified Carbon Materials via High-Temperature Calcination and Their Application in the Negative Electrode of Lead-Carbon Batteries

Facile and low-cost preparation of Co and N co-doped hierarchical porous carbon as a functional separator for Li-S batteries

In-situ synthesis of novel nanostructured Pb@C composites for improving the performance of lead-acid batteries under high-rate partial-state-of-charge operation

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Hierarchical Carbon Nanotubes with a Thick Microporous Wall and Inner Channel as Efficient Scaffolds for Lithium–Sulfur Batteries

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Enhancing Cycle Performance of Lead-Carbon Battery Anodes by Lead-Doped Porous Carbon Composite and Graphite Additives

In-situ carbon encapsulated Pb/PbO nanoparticles derived from spent lead paste for lead-carbon battery

Lead Single Atoms Anchored on Reduced Graphene Oxide As Multifunctional Additive for Lead–carbon Battery