Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Determination of the tortuosity and contact resistances in thick graphite anodes via electrochemical impedance spectroscopy

Visualization of concentration polarization in thick electrodes

Concurrent operando neutron imaging and diffraction analysis revealing spatial lithiation phase evolution in an ultra-thick graphite electrode

Determination and Engineering of Li‐Ion Tortuosity in Electrode Toward High Performance of Li‐Ion Batteries

Determination and Engineering of Li‐Ion Tortuosity in Electrode Toward High Performance of Li‐Ion Batteries (Adv. Energy Mater. 31/2024)

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Determination on the Inherent Thermal Conductivity and Thermal Contact Resistance of Individual Thin-Layer Materials in Li-ion Batteries

Unveiling low-tortuous effect on electrochemical performance toward ultrathick LiFePO4 electrode with 100 mg cm−2 area loading

Tunable Porous Electrode Architectures for Enhanced Li-Ion Storage Kinetics in Thick Electrodes.

Recent advance into understanding electro-chemo-mechanical behavior of lithium ion batteries by electron microscopy

Design and preparation of thick electrodes for lithium-ion batteries

Tuning the Electrochemical Performance of Graphite Electrodes in Lithium-Ion Batteries: Thermodynamics Versus Kinetics

Contribution of X-ray experiments and modeling to the understanding of the heterogeneous lithiation of graphite electrodes

Design of Thick Electrodes with Vertical Channels for Aqueous Batteries: Experimental and Numerical Analysis

Fabrication of Low‐Tortuosity Ultrahigh‐Area‐Capacity Battery Electrodes Through Magnetic Alignment of Emulsion‐Based Slurries

Engineering graphite microfiber-based thick electrodes as anode material for lithium ion batteries

Rational Design of Thick Electrodes in Lithium‐Ion Batteries by Re‐Understanding the Relationship Between Thermodynamics and Kinetics

A strategy to build high-performance thick electrodes for lithium-ion batteries with enhanced compressive modulus and regulated tortuosity in the phase-inversion process

Influence of Conductive Additives and Binder on the Impedance of Lithium-Ion Battery Electrodes: Effect of Morphology

Unravelling the Capacity Degradation Mechanism of Thick Electrodes in Lithium‐Carbon Dioxide Batteries via Visualization and Quantitative Techniques

Direct Observation of the Anisotropic Transport Behavior of Li Plus in Graphite Anodes and Thermal Runaway Induced by the Interlayer Polarization