Abstract:The vulnerability of bridges and the effectiveness of suitable mitigation techniques in regions exposed to different seismic scenarios, while lacking reliable fragility assessment studies for existing bridge inventory, need focused attention. Further, while several retrofit techniques were proposed for improving the seismic performance of existing bridges, the limitations of such approaches need further investigation. Thus, this study assesses the seismic vulnerability of a benchmark structure representing pre-seismic code multi-span bridges in an earthquake-prone region before and after the retrofit to mitigate earthquake-related losses. The numerical modeling approaches of the selected bridge and retrofit systems were verified using the results of previous experimental studies. Detailed three-dimensional fiber-based (3DFB) simulation models were then developed to assess the seismic response of the benchmark bridge under the effects of diverse earthquake records representing far-field and near-source seismic scenarios in both longitudinal and transverse directions. The obtained results from several inelastic pushover analyses (IPAs) and incremental dynamic analyses (IDAs) confirmed the vulnerability of the benchmark bridge and the pressing need for mitigation actions to reduce the expected seismic losses under different seismic scenarios. Higher damage probabilities were observed under the effects of far-source events and at lower intensities than their near-field counterparts. Based on the probabilistic assessment study, it is concluded that retrofitting the bridge with buckling restrained braces (BRBs) is an effective mitigation measure to increase the lateral strength and overcome the high curvature ductility (CD) demands observed in bents, particularly under the most critical seismic scenario. The study provides insight into the impacts of contemporary retrofit techniques on improving the seismic performance of substandard bridges and presents a range of fragility functions for the assessment and mitigation of earthquake risks.

Incremental dynamic analysis applied to seismic financial risk assessment of bridges

Enhancing Bridge Performance Following Earthquakes Using Markov Decision Process

Exceeding Probability of Earthquake-Induced Dynamic Displacement of Rail Based on Incremental Dynamic Analysis

Optimum Life-Cycle Maintenance Strategies of Deteriorating Highway Bridges Subject to Seismic Hazard by a Hybrid Markov Decision Process Model

Approximate MPA-based method for performing incremental dynamic analysis

Incremental dynamic analysis and FEMA P695 seismic performance evaluation of a cold‐formed steel–framed building with gravity framing and architectural sheathing

Assessing Seismic Fragility of Low-Rise RC Buildings by means of Incremental Dynamic Analysis (IDA)

Dynamic behaviour of R/C highway bridges under the combined effect of vertical and horizontal earthquake motions

Seismic Performance Assessment of Arch Dams Using Incremental Nonlinear Dynamic Analysis

Simplified state‐dependent seismic fragility assessment

Assessing the seismic behavior of steel moment frames equipped by elliptical brace through incremental dynamic analysis (IDA)

Cloud to IDA: Efficient fragility assessment with limited scaling

Risk-based framework for post-earthquake monitoring and evaluation of reinforced concrete bridges subject to multiple hazards

Seismic Fragility Assessment of an Existing Multi-Span RC Bridge Equipped with Risk Mitigation Systems

Construction Stage Seismic Vulnerability Evaluation of a Continuous Girder Bridge with the Cast-in-Place Cantilever Construction Method

Modified Elastic Dynamic Analysis (EDA) for Seismic Demand on In-Span Hinge Shear Keys in Multi-Frame Bridges

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Probabilistic Incremental Dynamic Analysis for Seismic Isolation Systems through Integration with the NHERI-SimCenter Performance-Based Engineering Application

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Toward life-cycle reliability-, risk- and resilience-based design and assessment of bridges and bridge networks under independent and interacting hazards: emphasis on earthquake, tsunami and corrosion