Abstract:The application of pulsed electric fields with durations in the range of nanoseconds and field strengths on the order of hundred kilovolt per centimeter has demonstrated great potential for the treatment of cancer cells. However, successful exposures require the generation of high voltage pulses that can be sustained across a load with an impedance that is often much lower than 100 ohm. A second challenge is the wish to expose cell suspensions in large volumes and eventually also extended tumors. These requirements are driving the development of pulse generators that can provide pulses with amplitudes of several tens of kilovolts across loads of only a few tens of ohms. In addition pulse generators should be small and portable to bring them to different treatment sites and patients, respectively. Many nanosecond pulse generators that are currently used for biomedical studies rely on transmission line configurations. With this straight forward approach it was possible to develop pulse generators which allow the exposure of samples with an impedance as low as 10 ohm. However, the pulse amplitude across a matched load is generally limited to values of 30-35 kV. An increase of the pulse voltage is possible with Marx-bank topologies and we have constructed a system providing a peak voltage of 90 kV in a pulse with a duration of about 250 ns across a load with an impedance of 300 Ω. However, this pulse is not rectangular. To provideamplitudes. Pulse forming networks and Blumlein line pulse generators were investigated. In particular we studied systems that are based on the concept of stacked Blumlein lines.lines. Several systems for the generation of 100-ns pulses were built and used in experiments with different biological loads.

A Novel Configuration of Modular Bipolar Pulse Generator Topology Based on Marx Generator With Double Power Charging

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Investigation on a Novel Multiple-Switch Pulsed Power Technology

A Novel High-Frequency Bipolar Pulsed Power Generator for Biological Applications

Novel Multiple-Switch Blumlein Generator

Research on Marx Generator Combining Resonant Charging With Boost Structure

A Novel Circuit Topology for Pulsed Power Generation

An Energy-Saving Pulsed Magnetic Field Generator Based on Modular Marx Circuit

Novel Multiple-switch Pulsed Power Technologies

All Solid-State Marx Modulator with Bipolar High-Voltage Fast Narrow Pulses Output

A New Modular Bipolar High-Voltage Pulse Generator

Bipolar high voltage pulse generator without H-bridge based on cascade of positive and negative Marx generators

Solid-State Generation of High-Frequency Burst of Bipolar Pulses for Medical Applications

Repetitive High-Voltage Pulse Modulator Using Bipolar Marx Generator Combined with Pulse Transformer

A Novel Boost Marx Pulse Generator Based on Single-Driver Series-Connected SiC MOSFETs

Full-Bridge Modular Multilevel Submodule-Based High-Voltage Bipolar Pulse Generator With Low-Voltage DC, Input for Pulsed Electric Field Applications

A Bipolar High Voltage Pulse Generator Used for Irreversible Electroporation Ablation

All-Solid-State Repetitive Pulsed-Power Generator Using IGBT and Magnetic Compression Switches

Improved Marx Pulse Generator With Auxiliary Trigger Topology (2022)

Compact high-voltage, low-impedance nanosecond pulse generators for biomedical applications

High-voltage pulse waveform modulator based on solid-state Marx generator