Abstract:Liquid dye lasers are intrinsically suitable for high-average-power operation because their flowing laser gain media can effectively remove the heat produced by laser amplification; thus, liquid dye lasers have a significant place in various laser applications. However, to sufficiently remove the dye solution heated by the laser, a very cumbersome dye flow system is required to achieve a high flow velocity in the dye cell of a high-power dye laser, which limits its applications. In this paper, we found that the pressure and power required to drive the high-speed dye flow are both proportional to the square of the laser beam size along the direction of the flow. Based on this result, we proposed a novel longitudinal pumping scheme that uses elliptical laser beams. This new scheme can significantly reduce the size and energy consumption of dye flow loops in high-power dye lasers. We also developed a dye laser system with a main amplifier using a 1 mm × 4 mm elliptical input laser beam. The amplifier produced an average power of 135 W with a repetition rate of 10 kHz and a conversion efficiency of 39.5%. The M2 factor of the output beam was better than 1.7. The flow parameters to drive the dye flow loops were 2.1×105 Pa, and 0.43 L/s, which gave a clearing ratio of 2 for the amplifier. This new pumping scheme enables high-power dye lasers to be more compact and efficient, making them more flexible for various applications.

Double-Cycle Alternating-Flow Diode Pumped Potassium Vapor Laser

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Kinetic and Fluid Dynamic Modeling, Numerical Approaches of Flowing-Gas Diode-Pumped Alkali Vapor Amplifiers.

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

Theoretical Investigation on Exciplex Pumped Alkali Vapor Lasers with Sonic-Level Gas Flow

Modeling of the Static and Flowing-Gas Ring-Ld Side-Pumped Alkali Vapor Amplifiers

Three-Dimensional Kinetic and Fluid Dynamic Modeling and Three Iterative Algorithms for Side-Pumped Alkali Vapor Lasers

Influences of Operating Parameters on Deleterious Processes of Side-Pumped Cesium Vapor Laser Amplifiers with Flowing Medium

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Modeling of Time Evolution of Power and Temperature in Single-Pulse and Multi-Pulses Diode-Pumped Alkali Vapor Lasers

Modeling of Steady-State Temperature Distribution in Diode-Pumped Alkali Vapor Lasers: Analysis of the Experimental Results

A Kinetic Model for Diode Pumped Rubidium Vapor Laser

Modeling of a diode transverse-pumped cesium vapor laser

Detailed Computation on Exciplex Pumped Alkali Vapor Laser with Supersonic Flow

A kinetic model for optically pumped cesium vapor laser

Analysis of temperature distributions in diode-pumped alkali vapor lasers

Modeling of Three-Dimensional Exciplex Pumped Fluid Cs Vapor Laser with Transverse and Longitudinal Gas Flow

Theoretical Analysis of the Semi-Ring and Trapezoid LD Side-Pumped Alkali Vapor Lasers

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

A new longitudinal pumping scheme that uses elliptical laser beams to improve the compactness and efficiency of high-power dye lasers