Abstract:ContextTwo-dimensional semiconductor materials have received much attention in recent years due to their wide variety of applications in the field of nano-optoelectronic devices. In this project, we applied stresses ranging from −6 to +6% to the ZrSe2/HfSe2 heterostructure and systematically investigated its electrical and optical properties. It is discovered that stress can effectively modulate the forbidden bandwidth of the ZrSe2/HfSe2 heterojunction; whereas, under compressive stress, the forbidden bandwidth of the material decreases further until the bandgap is zero, leading to the material’s transformation from semiconductor to metal. The forbidden band gap of the ZrSe2/HfSe2 heterojunction increases with increasing horizontal biaxial tensile strain. We discovered that the light absorption performance of this heterostructure is significantly better than that of its similar monomolecular layer and that its light absorption intensity can reach an order of magnitude of 104. Under compressive and tensile stresses, the ZrSe2/HfSe2 heterojunctions exhibit different degrees of red or blue shift. The results indicate that constructing ZrSe2/HfSe2 heterojunctions and applying horizontal biaxial stresses to them can significantly modulate the optoelectronic properties of the materials. ZrSe2/HfSe2 heterojunction is a new type of high-performance photogenerated carrier transport device with a wide range of applications.MethodsThe calculations in this study are carried out the first principles approach of density functional theory, as implemented in the CASTEP module of Materials-Studio2019. The researchers used an ultrasoft reaction potential to calculate the interactions between the ion core and the electrons and applied the Perdew-Burke-Ernzerhof (PBE) and the generalized gradient approximation (GGA) to perform the calculations. The Monkhorst-Pack technique was employed to create the k-point samples utilized for integration on the Brillouin zone, and the k-point grid was uniformly 6 × 6 × 1. In addition, in order to avoid interactions between the atomic layers affecting the properties and stability of the material, such interactions were prevented by adding a 30 Å vacuum layer. Using a plane-wave energy cutoff of 500 eV and the convergence accuracy of the iterative process was set to 1 × 10−5 eV to ensure the accuracy of the computational results, and in addition. The maximum stress in the lattice was limited to less than 0.05 GPa or the interaction force between neighboring atoms was lower than 0.03 eV/Å. For the calculation of the properties of the optical properties, a k-point grid of 18 × 18 × 1 is used for optimization, and the polarization direction of the material is not taken into account, considering that the material is isotropic. This study proposes to apply the Tkatchenko-Scheffler (TS) dispersion correction method in DFT-D to appropriately represent the interlayer van der Waals interaction forces to solve inaccuracies in the computation of van der Waals interactions via density functional theory.

First principles calculation of interface interactions and photoelectric properties of ZnSe/SnSe heterostructure

Tunable Properties of ZnSe/graphene Heterostructure As a Promising Candidate for Photo/electro-Catalyst Applications

The Electronic and Optical Properties of InSe/ZnO Van Der Waals Heterojunction:First Principles Study

Band Alignment Determination of Zno/Pbse Heterostructure Interfaces by Synchrotron Radiation Photoelectron Spectroscopy

Band gap and interface engineering of ZnO@MoSe 2 heterojunction film and its light-matter coupling

First-principles study of the electronic structures and optical properties of g-ZnO/CdX (X = S, Se, Te) van der Waals heterostructures

Interfacial Regulation of the Semiconductor Heterostructure for Enhanced Photoelectrochemical and Photocatalytic Performances

Strain-induced effects on the optoelectronic properties of ZrSe2/HfSe2 heterostructures

Electronic and Optical Properties of Heterostructures Based on Transition Metal Dichalcogenides and Graphene-Like Zinc Oxide.

Interface Engineering in 1D ZnO‐Based Heterostructures for Photoelectrical Devices

Band alignment of type-I SnS2/Bi2Se3 and type-II SnS2/Bi2Te3 van der Waals heterostructures for highly enhanced photoelectric responses

Layer-dependent semiconductor-metal transition of SnO/Si(001) heterostructure and device application

Calculation of tunable electronic and optical properties of AlP/InSe heterostructure based on first principles

Structure design and properties investigation of Bi2O2Se/graphene van der Waals heterojunction from first-principles study

High Carrier Mobility and Broad Spectrum GaSe/SnSe Van Der Waals Heterostructure Optoelectronic Devices: First-principles Study

Study of Structural and Electronic Properties of (znsezb)(m)/(znsewz)(n) Superlattices Based on HSE Hybrid Functional

First-principles calculations of thermoelectric transport properties in WSe2/SnS2 bilayer heterostructure

First principles study of electronic properties and optoelectronic performance of type-II SiS/BSe heterostructure

A Theoretical Perspective of the Enhanced Photocatalytic Properties Achieved by Forming Tetragonal ZnS/ZnSe Hetero-Bilayer.

First-Principles Study of the Structural, Electronic, and Enhanced Optical Properties of SnS/TaS2 Heterojunction

Effects of Interlayer Coupling and Electric Field on the Electronic Properties of PtSe2/ZrSe2 Van Der Waals Heterojunctions