Abstract:Lithium-ion Batteries (LIBs) are the electrochemical energy storage technology of choice for an incredible range of technologies, from handheld consumer electronics to electric vehicles. Since their introduction, the application of these batteries has been limited by their energy density, which is in turn currently gated by the low theoretical energy density of the graphite anodes that are standard in the field. Si has long been targeted as a next generation anode material, with a theoretical energy density almost 10 times larger than graphite, however uncontrolled electrolyte decomposition on its surface has caused poor cycle life and low columbic efficiencies in Si-containing cells 1 . In this work, a new class of organosilicon (OS) additives were introduced to the Si anode literature and their effect on the first-cycle electrochemistry on model anode surface was explored using in operando electrochemical quartz crystal microbalancing (EQCM) and electrochemical impedance spectroscopy (EIS). Ex situ x-ray photoemission spectroscopy (XPS) was also used to investigate the differences in chemical composition of solid electrolyte interface (SEI) layers formed in the presence and absence of additive. EQCM-EIS experiments demonstrated an increase in cell impedance early in the cycle, which lead to the suppression of early electrolyte decomposition on the model anode surface. Subsequently, lithiation and delithiation proceeded more efficiently and with lower impedance in additive-treated cells. Finally, XPS investigations of the SEI composition revealed that OS-treated cells create thinner SEI layers that were richer in LiF and contained less organic material than cells without OS. (1) Jin, Y.; Zhu, B.; Lu, Z.; Liu, N.; Zhu, J. Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery. Adv. Energy Mater. 2017, 1700715, 1–17. https://doi.org/10.1002/aenm.201700715.

Binary Cation Matrix Electrolyte and Its Effect on Solid Electrolyte Interphase Suppression and Evolution of Si Anode

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Electrolyte Role in SEI Evolution at Si in the Pre-lithiation Stage versus the Post-lithiation Stage

Building a Flexible and Highly Ionic Conductive Solid Electrolyte Interphase on the Surface of Si@C Anodes by Binary Electrolyte Additives

Existence of Solid Electrolyte Interphase in Mg Batteries: Mg/S Chemistry As an Example.

Study on Solid Electrolyte Interphase Excessive Growth Caused by Mn (II) Deposition on Silicon Anode

Using Mixed Salt Electrolytes to Stabilize Silicon Anodes for Lithium-Ion Batteries via In situ Formation of Li-M-Si Ternaries (M=Mg, Zn, Al, Ca).

Research progress of solid electrolyte interphase for sodium metal anodes

Tuning the Formation and Structure of the Silicon Electrode/Ionic Liquid Electrolyte Interphase in Superconcentrated Ionic Liquids

A Novel Regulation Strategy of Solid Electrolyte Interphase Based on Anion-Solvent Coordination for Magnesium Metal Anode.

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Insights into Spontaneous Solid Electrolyte Interphase Formation at Magnesium Metal Anode Surface from Ab Initio Molecular Dynamics Simulations

Leveraging Cation Identity to Engineer Solid Electrolyte Interphases for Rechargeable Lithium Metal Anodes

An Artificial Solid Electrolyte Interphase with High Li‐Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

Engineering Stable SEI Film on Mg-Doped Li Metal Anode by Electrolyte Additive with High Donor-Number Anion for Li-S Batteries

Stable Solid Electrolyte Interphase in Situ Formed on Magnesium‐Metal Anode by Using a Perfluorinated Alkoxide‐Based All‐Magnesium Salt Electrolyte

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

Regulating Anode‐electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium‐ion Batteries with High‐nickel Layered Oxide Cathodes and Silicon‐Graphite Anodes

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance (EQCM) and Electrochemical Impedance Spectroscopy (EIS) to Studies of SEI Layer Formation on Amorphous Silicon Anodes

Synchronous Regulation on Solvation Structure and Interface Engineering to Enable Reversible Magnesium Metal Batteries