Abstract:The influence of the varying buoyancy effects on heat transfer characteristics was experimentally and numerically investigated. Different pressures, heat fluxes, and inclination angles were selected to alter the buoyancy effect. Operating parameters were varied (Pressure varied from 25 MPa to 29 MPa, mass flux varied from 800 kg/(m(2)center dot s) to 2294 kg/(m(2)center dot s), heat flux varied from 500 kW/m(2) to 714 kW/m(2), and the inclination angle varied from 0 degrees to 90 degrees). The comparison of heat transfer characteristics between 2000 kg/(m(2)center dot s) and 2294 kg/(m(2)center dot s) was conducted by experiments, showing that the average heat transfer coefficients at G = 2000 kg/(m(2)center dot s) are better than those at G = 2294 kg/(m(2)center dot s) due to the different buoyancy effects. The comparison between 650 kW/m(2) and 714 kW/m(2) showed that the heat transfer characteristics improve with the increase in heat flux under a high mass flux condition. Moreover, a 3-D numerical model was built for predicting the heat transfer characteristics in inclined tubes. The influence of buoyancy effects induced by the different inclination angles on the heat transfer characteristics was investigated numerically. The numerical results showed that the buoyancy effect is evident at G = 800 kg/(m(2)center dot s). The buoyancy effects reflect in the velocity of secondary flow, fluid temperature, and temperature gradient of boundary layers. The influence of pressure on the heat transfer characteristics reflects in the radial distributions of properties. The temperature and temperature gradient are higher at the bottom of the 75 degrees inclined tube and the top of the 15 degrees inclined tube, resulting in a decline in the heat transfer coefficients. Finally, the ratio of vorticity and Reynold's numbers (Se/Re) was adopted as a criterion to predict the buoyancy effects in the inclined tubes, and the results showed that Se/Re is suitable for evaluating buoyancy effect.

Experimental study of the influence of buoyancy on turbulent mixed convection in lead–bismuth eutectic flow under inclination conditions

Numerical Study on Thermal Performance of a BOG Heat Exchanger in the Inclined Condition

Buoyancy Impact on Heat Transfer of Lead-Bismuth Eutectic for Nuclear Applications

Experimental Study of the Effect of Inclination Angle on the Minimum Conveying Velocity and the Underlying Mechanisms

Direct Numerical Simulation of Turbulent Mixed Convection of LBE in Heated Upward Pipe Flows

DNS of Turbulent Mixed Convection over a Vertical Backward-Facing Step for Lead-Bismuth Eutectic

Flow and heat transfer evaluation of lead-bismuth eutectic coolant for nuclear power application

Experimental and Numerical Investigations on the Influence of Buoyancy on Supercritical Water Heat Transfer Characteristics in Inclined Smooth Tubes

Experimental investigation on flow and heat transfer characteristics of lead–bismuth eutectic in circular tubes

Flow and heat transfer analysis of lead-bismuth eutectic flowing in a tube under rolling conditions

Experimental Study on Heat Transfer Characteristics of LBE Flow in a Vertical Tube under Static and Rolling Conditions

EXPERIMENTAL RESEARCH ON HEAT TRANSFER CHARACTERISTIC OF LIQUID LEAD-BISMUTH EUTECTIC FLOWING IN ANNULAR CHANNEL

Numerical and Experimental Analysis of LBE Flow and Heat Transfer Characteristics in Hexagonal Rod Bundles

Experimental Study on the Natural Circulation Capability and Heat Transfer Characteristic of Liquid Lead Bismuth Eutectic

Effects of Duct Inclination Angle on Thermal Entrance Region of Laminar and Transition Mixed Convection

Numerical Study on Turbulent Mixed Convection in Inclined Rectangular Channels

DNS of Instantaneous Behavior in Turbulent Forced and Mixed Convection of Liquid Metal Past a Backward-Facing Step

Numerical study on the heat transfer characteristics of a liquid lead–bismuth eutectic in a D-type channel

Flow Fluctuations and Flow Friction Characteristics of Lead-Bismuth Eutectic in a Vertical Tube under Rolling Conditions

Effect of Heat Flux Distribution on Entropy Generation and Irreversibility of Lead-Bismuth Eutectic (LBE) Forced Convective Heat Transfer

Effects of Magnetic Field and Inclination on Natural Convection in a Cavity Filled with Nanofluids by a Double Multiple-Relaxation-Time Thermal Lattice Boltzmann Method