Abstract:Activated carbon (AC) exhibits limited adsorption capacity for pollutants. Conversely, titanium dioxide (TiO2) demonstrates excellent photocatalytic performance, making it a popular choice for pollutant removal. This study investigates the removal of methylene blue (MB) dye from wastewater using AC, TiO2@AC-2, and TiO2@AC-10 samples via adsorption and photocatalysis. The Energy Dispersive analysis of X-rays (EDAX) has confirmed the presence of Ti, C and O in the prepared samples without any impurities. All the diffraction peaks in X-ray diffractograms indicated the presence of pure anatase TiO2 (tetragonal phase) with no evidence of any other phase. Fourier transform infrared spectroscopy (FTIR) analysis identified a peak around 545 cm−1 in the TiO2@AC-2 sample, indicative of O-Ti-O stretching vibrations. This peak shifted to 602 cm−1 in the TiO2@AC-10 sample. Raman spectroscopy confirmed the presence of carbon (D and G bands) at 1310-1347 cm−1 and 1582-1597 cm−1. Additionally, characteristic Raman active bands for anatase TiO2 were observed at 154 cm−1 (Eg), 204 cm−1 (Eg), 398 cm−1 (B1g), 508 cm−1 (A1g), and 628 cm−1 (Eg). N2 adsorption-desorption isotherms revealed a mesoporous structure for all samples (AC, TiO2@AC-2, and TiO2@AC-10) with hysteresis loops, indicating pores ranging from 2 nm to 50 nm in diameter. Reflectance spectra of TiO2@AC-2 and TiO2@AC-10 displayed absorption edges at 368 nm and 385 nm, respectively, corresponding to a direct band gap of approximately 3.22 eV. Subsequently, these prepared samples were effectively employed for the removal of methylene blue (MB) dye from wastewater utilizing both adsorption and photocatalysis method. Under dark conditions, 20 mg/L doses of TiO2@AC-2 and TiO2@AC-10 resulted in 60% and 36% dye adsorption within 60 minutes respectively. In the presence of UV radiation, the degradation of dye was observed to be 74% and 95% by TiO2@AC-2 and TiO2@AC-10 respectively. This observation indicates that TiO2 nanoparticles along with AC leads to enhanced photocatalytic activity. The Langmuir-Hinshelwood model reveals lower rate constants for AC compared to the composite samples. This is likely because AC lacks inherent catalytic activity, requiring UV light to trigger adsorption. Conversely, TiO2@AC-10 exhibits the highest rate constants (K1 = 24.25 × 10-3 min−1 and K2 = 82.71 × 10-3 min−1), aligning with its higher TiO2 content confirmed by EDAX analysis. This suggests a significantly faster photocatalytic rate and superior degradation efficiency, even at a low sample concentration (20 mg/L).

Defect Induced Ultrafast Organic Dye Adsorption by Amorphous Titanium Dioxide/Phosphorus-Doped Carbon Nanodot Hybrid

Carbonized titanium dioxide with good adsorption properties for cationic dyes via simple heat treatment

Synthesis of Natural Porous Minerals Supported Tio2 Nanoparticles and Their Photocatalytic Performance Towards Rhodamine B Degradation

Photocatalytic degradation of selected dyes by titania thin films with various nanostructures

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

Dye degradation and molecular docking mechanism of Terminalia catappa mediated mesoporous titanium dioxide nanoparticles

Kinetic study of adsorption and photocatalytic degradation of methylene blue dye using TiO2 nanoparticles with activated carbon

High efficiency azo dye removal via a combination of adsorption and photocatalytic processes using heterojunction Titanium dioxide nanoparticles on hierarchical porous carbon

Removal of a Cationic Dye by Adsorption / Photodegradation Using Electrospun PAN / O-MMTComposite NanofibrousMembranes Coated with TiO 2

One-Step Synthesis of Recyclable Ti-Doped Porous SiO2 Microspheres with Superior Structural Stability for Cationic Dye Adsorption

Photocatalytic degradation of organic dyes using titania modified with adsorbent nanolayers

Hierarchical mesoporous TiO2/starch-based microparticles used as an efficient and reusable adsorbent for removal of water-soluble dye

Photocatalytic adsorption and scavenging potential of chemical and green encapsulated anatase phase of coupled doped Zn-Co TiO2 nanoparticles

Facile synthesis of TiO2-carbon composite doped nitrogen for efficient photodegradation of noxious methylene blue dye

Selective and Efficient Adsorption of Anionic Dyes by Core/shell Magnetic MWCNTs Nano-Hybrid Constructed Through Facial Polydopamine Tailored Graft Polymerization: Insight of Adsorption Mechanism, Kinetic, Isotherm and Thermodynamic Study

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO 2 in the presence of phosphate anions

Enriched photocatalytic degradation of methylene orange dye using carbon quantum dots surface-decorated TiO 2 nanocomposites

Enhanced Photocatalytic Degradation of Organic Dyes Via Defect-Rich TiO2 Prepared by Dielectric Barrier Discharge Plasma.

Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes

Photocatalytic Activity of Defective TiO2-x for Water Treatment/Methyl Orange Dye Degradation

Surface Morphology and Modulus, Wetting Behavior and Photocatalytic Activity of the TiO2 Coated Materials Based on PMMA/O-MMT Composite Microfibers