Abstract:For recent lithium-ion batteries (LIBs), there have been lots of researches about convert liquid-phase electrolyte to solid-state electrolyte (i. e. all-solid-state battery) to improve safety and stability. Solid-state electrolyte materials have to satisfy some criteria including high ionic conductivity at room-temperature, chemical stability against reducing environment, and mechanical strength. Many solid-materials for electrolyte have been researched, including perovskite, garnet, and sulfide-type of materials. Among them, garnet-type based lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) has been received attention due to its high ionic conductivity (~10 -4 S/cm at room temperature) and wide electrochemical stability window (~6 V versus Li/Li + ). The main issue of LLZO is the high interfacial resistance with anode and cathode materials such as Li metal and LiCoO 2 . Many researchers have tried to understand the cause of this interfacial resistance for LLZO. K. Park et al. researched about the cathode/electrolyte (LLZO) interface and revealed co-diffusion and second-phase formation of LLZO at high-temperature [1]. M. Zarabian et al. reported that spin-coated LLZO on the LiCoO 2 pellet fabricated at low-temperature (~400 o C) and co-diffusion of La and Co at the interface by using X-ray photoelectron spectroscopy (XPS) [2]. They commonly suggested that elevated temperature make chemical interaction and this make high interfacial resistance. In this study, we adopted novel sintering method, flash light annealing (FLA) process, to fabricate LLZO solid-electrolyte. This method is also called rapid, cool sintering because of its unique characteristics compared to conventional sintering methods [3]. FLA uses instantaneous high current to generate intensive pulsed light (IPL), and irradiate IPL toward the specimen to sinter the materials. Unlike the conventional sintering methods, this novel method has lots of advantages including availability of treatment at STP and fast sintering time (~ a few ms). Rapid sintering process gives no time for the diffusion at the interface, thus the interfacial resistance between cathode and LLZO solid-electrolyte must be reduced. We fabricated LLZO solid-electrolyte on the commercial LiCoO 2 pellet by using solution-based spin-coating method and sintered the film by using FLA method. XPS and energy-dispersive X-ray spectroscopy (EDX) analysis were conducted to observe interface and diffusion of La and Co elements. Also, X-ray diffraction (XRD) method was used to investigate sintering ability of FLA through crystallinity development. The interfacial resistance between LiCoO 2 and LLZO solid-electrolyte was analyzed by electrochemical impedance spectroscopy (EIS) through cross-plane set-up.

The effects of electric field on physical properties of LLZO made by flash sintering method

Effect of Sintering on Structural Modification and Phase Transition of Al-Substituted LLZO Electrolytes for Solid State Battery Applications

Influence of Microwave Sintering and Pellet Pressure on the Phase Formation, Microstructure and Lithium-Ion Conductivity of the Li6.28Al0.24La3Zr2O12 Solid Electrolyte

Lithium Volatilization and Phase Changes during Aluminum-Doped Cubic Li6.25La3Zr2Al0.25O12 (c-LLZO) Processing

Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes

Key factors of the self-consolidation mechanism for sintering Li7La3Zr2O12 solid electrolytes

Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte

Influence of sintering atmosphere on the phase, microstructure, and lithium-ion conductivity of the Al-doped Li7La3Zr2O12 solid electrolyte

Comparative analysis on the thermal, structural, and electrochemical properties of Al-doped Li7La3Zr2O12 solid electrolytes through solid state and sol-gel routes

Synergetic Effect of Li-Ion Concentration and Triple Doping on Ionic Conductivity of Li7La3Zr2O12 Solid Electrolyte

Effect Temperature for improving the Li-ion conductivity of Li7La3Zr2O12

Microstructure and ion conductivity of Al‐LLZO solid electrolyte prepared by molten salt and cold sintering process

A Study on Cathode Interface of Li-La-Zr-O Solid-State Electrolyte Fabricated Via Rapid Sintering Process

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12

Crystal Structure and Preparation of Li7La3Zr2O12 (LLZO) Solid-State Electrolyte and Doping Impacts on the Conductivity: An Overview

Low temperature synthesis of Al-doped Li7La3Zr2O12 solid electrolyte by a sol–gel process

Room-temperature ionic conductivity of Ba, Y, Al co-doped Li7La3Zr2O12 solid electrolyte after sintering

Fast and low-temperature densification of highly conductive Li7La3Zr2O12 ceramic electrolytes for solid-state batteries

Al-doped Li7La3Zr2O12 garnet-type solid electrolytes for solid-state Li-Ion batteries

Critical Current Density Limitation of LLZO Solid Electrolyte: Microstructure vs Interface

Synthesis of Li7La3Zr2O12 Solid Electrolyte by Solid Phase Sintering Method