Abstract:In order to improve the economical efficiency and convenience during the bridge scour assessment,a theory of analyzing the bridge scour condition by tracing the dynamic performances of bridges was proposed.Based on the natural frequencies of vibration and modes of vibration after filtering,a structural flexibility matrix was established reflecting the bridge condition.Using such flexibility matrix,"calculatedly structural displacement discrepancy" was deduced based on a concerned direction of structural stiffness as an identification parameter of bridge scour.A quantitative relationship between the identification parameter and scour depth was then obtained after a series of parametric analysis.Meanwhile the actual value and dynamic performance were obtained during the bridge routine detection and measurement.Therefore,based on the pre-obtained relationship between structural displacement difference and scour depth,the bridge scour depth at the moment of monitoring was calculated corresponding to the practical value.Finally a simple support bridge was used to demonstrate the specific application methods and steps for the proposed condition assessment method of bridge scour in terms of identification of dynamic characteristics.The pile-soil springs along different directions were established based on the code of American Petroleum Institute (API).The bridge scour was simulated by sequentially removing the springs.The prerequisite of the proposed method in the real engineering was further given.The results show that the identified scour depths are equipped with acceptable accuracy and the coupling effects among different piers can be amended by fitting formulas.The qualitative and quantitative analysis of bridge scour in virtue of conventional project of bridge inspection has advantages of computational logic,convenience and economy of monitoring equipment.The scour depth can be correctly predicted as long as the dynamic performances of bridges are accurately measured and traced.

Bridge scour monitoring based on active heating and temperature measurement method

Bridge Scour Monitoring System Based On Active Thermometry

Bridge Scour Monitoring Using Electrical Resistivity Pole System

Development and Application of Temperature Measurement System for Urban Bridges

Field Application of an Innovative Bridge Scour Monitoring System with Fiber Bragg Grating Sensors

Bridge Scour Identification and Field Application Based on Ambient Vibration Measurements of Superstructures

Real-time Monitoring of Bridge Scouring Using Ultrasonic Sensing Technology

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Time-Frequency-Based Bridge Scour Identification by Trend-Change Detection

Scour Monitoring on A Field Bridge Using Fbg-Based Instrumentation

Bridge scour identification based on time-frequency analysis of superstructures

Development of Scour Monitoring Methods Based on Scour Effect Analysis

A Real-Time Bridge Scouring Monitoring System Based on Accelerometer Sensors

Digital Integration of Temperature Field of Cable-Stayed Bridge Based on Finite Element Model Updating and Health Monitoring

Evaluation of bridge instability caused by dynamic scour based on fractal theory

Advances in Vibration-Based Scour Monitoring for Bridge Foundations

Temperature effects on cable stayed bridge using health monitoring system: a case study

Condition Assessment of Bridge Scour by Tracing Dynamic Performances of Bridges

Scour effect on a single pile and development of corresponding scour monitoring methods

Scour Depth Determination of Bridge Piers Based on Time-Varying Modal Parameters: Application to Hangzhou Bay Bridge

Scour Monitoring System for Subsea Pipeline Based on Active Thermometry: Numerical and Experimental Studies