Abstract:Azo dyes are among the most significant xenobiotics that are resistant to environmental deterioration. In this study, Reactive Black (RB) 5 and Direct Red (DR) 23 dyes were removed from aqueous solutions using biogenic copper oxide nanoparticles synthesized from a cold-tolerant bacterium, namely Stenotrophomonas sp. The effects of physicochemical factors like pH, nanoparticle dose, dye concentration, and mixing speed were examined in batch biosorption experiments. The pseudo-second-order kinetic model and the Langmuir isotherm had better agreement with the biosorption data. Biogenic nanoparticles were studied using the following techniques: scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Zeta potential, X-ray powder diffraction (XRD) analysis, and energy-dispersive X-ray spectroscopy (EDS). These nanoparticles had an average size of 52.41 nm in the DLS analysis, and the PDI index was calculated to be 0.26, indicating the uniform size distribution of copper oxide nanoparticles. For the nanoparticles, flower-like and cluster morphology was seen in the SEM images. The oxygen and copper elements were said to have the two most notable EDS analysis peaks. The optimum pH for both dyes' adsorption was 2. The effective decolorization increased with an increase in the nanoparticle dose and mixing speed. Therefore, with an initial dye concentration of 20 mg/L, a mixing speed of 500 rpm, and a dose of 0.08 g of copper oxide nanoparticles in 80 min, the decolorization efficiency of RB5 dye reached 94%. For DR23 dye (20 g/L), 400 rpm mixing speed, and 0.04 g of copper oxide nanoparticles, 97% was measured after 60 min. The Langmuir isotherm and the pseudo-second-order kinetic model were used to explain how the RB5 and DR23 dyes adsorb to CuONPs biosorbent. Because of their superior capacity to adsorb both azo dyes, copper oxide nanoparticles synthesized by bacteria can be used as low-cost, promising, and potential alternatives to traditional wastewater treatment methods.

Exploring barley bagasse as affordable biosorbent for efficient copper and zinc removal from synthetic solutions and effluent

Copper and zinc adsorption from bacterial biomass - possibility of low-cost industrial wastewater treatment

Biosorption of heavy metal ions by a brewery's waste: kinetic and equilibrium

The removal of copper and zinc from swine wastewater by anaerobic biological-chemical process: Performance and mechanism

Removal of Metals by Biomass Derived Adsorbent in Its Granular and Powdered Forms: Adsorption Capacity and Kinetics Analysis

Toward a zero waste approach: Utilization of sugarcane bagasse for dye removal and multienzymes production

Industrial Symbiosis Between the Winery and Environmental Industry Through the Utilization of Grape Marc for Water Desalination Containing Copper(II)

Unleashing the potential of Cajanus cajun biochar polymer composite for Cu (II) removal: mechanism, modification, and application

Removal of Zinc Ions from Aqueous Solutions with the Use of Lignin and Biomass Part II

Removal of Pb2+, Ag+, Cs+ and Sr2+ from Aqueous Solution by Brewery'S Waste Biomass

Adsorption of copper and zinc by biochars produced from pyrolysis of hardwood and corn straw in aqueous solution.

Removal of Cu(II) ions from simulated wastewater using bagasse pith grafted polyacrylamide copolymer

Removal of Pb(II) and Cd(II) from a Monometallic Contaminated Solution by Modified Biochar-Immobilized Bacterial Microspheres

Enhanced Zn(II) adsorption by chemically modified sawdust based biosorbents

Chemical Modification of Agro-Industrial Waste-Based Bioadsorbents for Enhanced Removal of Zn(II) Ions from Aqueous Solutions

Copper ion removal from aqueous media using banana peel biochar/Fe3O4/branched polyethyleneimine

Biosorption of Pb(II) and Zn(II) from Aqueous Solutions by Living B350 Biomass

Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption

A Strategy to Valorize a By-Product of Pine Wood (Pinus pinaster) for Copper Removal from Aqueous Solutions

Effective Removal of Cyanide and Heavy Metals from an Industrial Electroplating Stream Using Calcium Alginate Hydrogels

Silicone-modified black peanut shell (BPS) biochar adsorbents: Preparation and their adsorptions for copper(II) from water