Abstract:The main safety issue of lithium-ion batteries (LIBs) is thermal runaway (TR), which has greatly hindered the application of LIBs. Phase change materials (PCM) have been used in battery modules as a thermal management method due to the heat absorption function during the phase change process. However, the role of PCM in TR propagation mitigation has not been carefully examined. In this paper, a 1D heat transfer model was developed to predict the mitigation effect of PCM on TR propagation of a battery array, which shows the superiority of high simulation speed and accuracy. The effects of thermo-physical parameters of PCM on cascading cell-to-cell thermal runaway propagation behavior were investigated. In addition, we gave an optimal range of key parameters of PCM based on safe regulations of China and the United Nations regarding to the TR in electric vehicle LIBs. It was found that the latent heat, density and heat capacity of PCM have similar effects on TR propagation behavior. With the increase of the three PCM parameters, the time duration between cell-to-cell failure propagation increases linearly, which shows a slower TR propagation rate. The optimal ranges for density, heat capacity and latent heat of PCM are over 2150 kg·m −3 , over 4100 J·kg −1 ·K −1 and over 9 × 10 5 J·kg −1 , respectively. What's more, the TR propagation will exacerbate with the increase of thermal conductivity of PCM, which reminds us to notice a balance between thermal management and TR mitigation in PCM-based thermal management system. Generally, through analyzing the effect of thermal diffusivity of PCM in TR inhibition, we found higher thermal diffusivity will speed up the propagation of TR. And the TR propagation speed is more sensitive to the change of density of PCM. The thermal diffusivity of PCM should be less than 9 × 10 −7 m 2 ·s −1 to satisfy the safety standards. The PCM manifests great performance in retarding TR propagation with the phase transition temperature in the range from 318.15 to 518.15 K. Moreover, we found that there exists a critical PCM thickness over which TR propagation will not occur. As the battery thickness increases from 8.8 to 56.5 mm, the critical PCM thickness shows a non-monotonic variation trend (increasing at first and decreasing later). This study demonstrates the feasibility of using PCM as a thermal runaway mitigation strategy and provides a guideline for the optimization of physical parameters of PCM.

Experimental study on nano-encapsulated inorganic phase change material for lithium-ion battery thermal management and thermal runaway suppression

Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Experimental investigation on mitigation of thermal runaway propagation of lithium-ion battery module with flame retardant phase change materials

Organic and Inorganic Hybrid Composite Phase Change Material for Inhibiting the Thermal Runaway of Lithium-Ion Batteries

Preparation and Application of Aluminum-Phenylphosphinate-Encapsulated Phase Change Materials for Thermal Management of Lithium-Ion Batteries

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Experimental study on low thermal conductive and flame retardant phase change composite material for mitigating battery thermal runaway propagation

Battery Thermal Safety Management with Form-Stable and Flame-Retardant Phase Change Materials

Application of Polyethylene Glycol-Based Flame-Retardant Phase Change Materials in the Thermal Management of Lithium-Ion Batteries

Flame retardant composite phase change materials with MXene for lithium-ion battery thermal management systems

Multifunction Composite Phase Change Material with Inorganic Flame Retardant and Organic Form Stability for Improving Battery Thermal Safety

The intrinsic flame retardant multifunctional composite phase change material with phosphorus pentoxide for battery thermal safety system

The effect of PCM on mitigating thermal runaway propagation in lithium-ion battery modules

Study on Thermal Runaway Risk Prevention of Lithium-Ion Battery with Composite Phase Change Materials

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Rapid Optimization of Thermal Runaway Propagation Inhibition in Composite Phase Change Material-based Battery Module

Investigation on the Properties of Flame-Retardant Phase Change Material and Its Application in Battery Thermal Management

Experimental Investigation on the Thermal Management for Lithium-Ion Batteries Based on the Novel Flame Retardant Composite Phase Change Materials

Experimental investigation on thermal management system with flame retardant flexible phase change material for retired battery module