Abstract:Frequent mining stress disturbances in deep-earth resource extraction lead to different degrees of initial damage within cemented tailings backfill (CTB), which in turn changes the structural characteristics of the matrix and significantly affects the stability of CTB. To simulate the stress disturbance process of CTB during mining activities more realistically, cyclic loading and unloading disturbances were performed on the CTB. The stress disturbance levels (SDL) were 20, 40, 60, and 80% uniaxial compressive strength (UCS), and the stress disturbance counts (SDC) were 5, 10, 15, and 20 times, respectively. Subsequently, a series of experimental studies were conducted on CTB and disturbed damage CTB (DCTB) using UCS, nuclear magnetic resonance, ultrasonic pulse velocity (UPV) testing, and acoustic emission (AE) monitoring. The results show that the UCS of the backfill decreased with increasing SDL and SDC, except for 20% SDL and 5th SDC. The elastic modulus exhibited a rise at 20%–40% SDL and a fall at 60%–80% SDL. Compared with CTB, the stress–strain curve of DCTB showed a left shift - overlap - right shift - accelerated right shift change in the compacting stage with increasing SDL. Moreover, the porosity and UPV reflected by the mesoscopic structure correspond to the trend of UCS. The correlation mechanism between mesoscopic structure and macroscopic strength was determined, and the initial damage degree of DCTB was defined in terms of the average variation characteristics of macro-mesoscopic parameters. According to the AE monitoring results, it was observed that increasing SDL and SDC led to a significant increase in the AE energy active stage during loading. The damage curve established from the AE energy considering the initial damage degree rose exponentially. As the initial damage degree intensified, a noticeable and wide-range drop in the b -value before the peak was observed, indicating the occurrence of frequent large-scale fracture activities within the DCTB. Also, the damage degree of DCTB intensified, the collapse zone increased, and the failure mode of the backfill transformed from tensile to mixed tensile-shear damage. The research results can provide theoretical support and a reference basis for the stability analysis and strength design of the backfill under the action of mining stress.

Strength, deformation and crack evolution behaviour of cemented tailings backfill composite structures with different strength ratios

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Acoustic emission characteristics and fracture mechanism of cemented tailings backfill under uniaxial compression: experimental and numerical study

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Study on mechanical properties and damage characteristics of coal-based solid waste cemented backfill

Energy Evolution and Damage Deformation Behavior of Cemented Broken Coal Specimen under Triaxial Compression Condition

Multi-algorithm based Gaussian mixture model applied to crack classification of cemented tailings backfill containing initial defects

Energy Mechanism and Acoustic Emission Characteristics in Rock-Backfill Composite Structure Specimens under Multi-Level Cyclic Loads: Cement-Tailings Ratio Effect

A Constitutive Model for Cemented Tailings Backfill Under Uniaxial Compression

Macro-mesoscopic mechanical properties and damage progression of cemented tailings backfill under cyclic static load disturbance

CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites

Initial pore distribution characteristics and crack failure development of cemented tailings backfill under low impact amplitude

Mechanical properties and energy damage evolution mechanism of fiber-reinforced cemented sulfur tailings backfill under uniaxial compression

Influence of different fibers on compressive toughness and damage of early age cemented tailings backfill

Mechanical Characteristics and Constitutive Model of Cemented Tailings Backfill under Temperature-Time Effects

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Dynamic response and deformation failure microscopic characteristics of cyclic impact–cemented tailing backfill

A combined experimental and numerical study on the triaxial and dynamic compression behavior of cemented tailings backfill

Dynamic mechanical response and damage evolution of cemented tailings backfill with alkalized rice straw under SHPB cycle impact load

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Degradation mechanism and life prediction of cemented tailings backfill under dry–wet cycles and salt erosion