Abstract:Fiber interferometric sensor can be used to measure torsion, and Mach–Zehnder interferometer (MZI) structured torsion sensor is convenient for practical applications, but the measurement sensitivity is low and needs to be improved. The off-axis light transmitted in the graded index fiber is highly susceptible to torsional modulation, which leads to a significantly higher response compared to the fundamental mode transmitted along the axis. As a result, the off-axis light is referred to as the “separation mode” because its transmission trajectory is separated from the fundamental mode. In this paper, we constructed a torsion sensing MZI using a graded index fiber, excited the separation mode to interfere with the fundamental mode to improve sensing sensitivity, designed four steps of sensitization in sequence, and proved the feasibility of the scheme through experimental. After four steps of sensitization, the sensitivity of the sensor gradually improves, with the highest torsion sensitivity of 4 nm/(rad/m) and −4.1 nm/(rad/m) in positive and negative directions, respectively. The linearity is good within the measurement range of −2.5 rad/m to 2.5 rad/m. The proposed torsion MZI sensitization scheme is novel, and with a high sensitivity torsion MZI, which will play an important role in the field of intelligent monitoring and control.

Symmetric and Asymmetric Core-Offset Mach–Zehnder Interferometer Torsion Sensors

Mach-Zehnder Interferometers Assembled with Optical Microfibers or Nanofibers

A Core-Offset Mach Zehnder Interferometer Based on A Non-Zero Dispersion-Shifted Fiber and Its Torsion Sensing Application

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

High sensitivity torsion sensing MZI based on exciting the separation mode of graded index fiber

High-performance vector torsion sensor based on high polarization-dependent in-fiber Mach-Zehnder interferometer.

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

In-fiber torsion sensor based on dual polarized Mach-Zehnder interference

Single S-Tapered Fiber Mach-Zehnder Interferometers

Thermally stable vector torsion sensing based on cascaded long-period fiber gratings in two-mode fiber

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

Direction-Discriminating torsion sensor based on optical fiber Mach-Zehnder interferometer

In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

Optimization Analysis of Lateral-Offset Mach–Zehnder Interferometer Based on No-Core Fiber

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

An Integrated Fiber Michelson Interferometer Based on Twin-Core and Side-Hole Fibers for Multiparameter Sensing

Investigation of an inline fiber Mach-Zehnder interferometer based on hybrid joints of core-offset and peanut-shape for refractive index sensing

A Curvature Mach-Zehnder Interferometer Fiber Sensor Based on Triple Cladding and Coreless Fiber

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing