Abstract:Solar energy utilization will play an increasingly important role in sustainable urban development because it will help motivate low-carbon development. This study proposed a framework that calculates the solar irradiance on roofs and facades of city-scale buildings, as well as the potential reductions in energy consumption and CO2 emissions that can be derived from solar energy utilization. This framework consolidates data acquired using 3D remote sensing techniques (e.g., light detection and ranging (LiDAR) data and digital photogrammetry) with existing 3D building vector models from urban planning and building design. To further the economical use of solar energy, the framework provides a new strategy based on three aspects (threshold, structure, and orientation), for a more realistic analysis of the available area of roofs and facades, by combining street view images and point clouds. Nanjing, China, was selected as a study area for validating and analyzing the proposed framework. The experimental area covers approximately 30 km(2) and 5216 buildings. The reliability of the proposed method was validated by comparing the results with the computation modules of mainstream commercial programs and previous international studies. The following conclusions were drawn from the experimental area. (1) Annual solar energy on the roofs of all buildings was 9647.89 GWh, corresponding to a PV yield of 1447.18 GWh, which equates to reductions of 584.66 kt in standard coal consumption and 1261.94 kt in CO2 emissions. The annual solar energy on the facades was 5364.63 GWh, corresponding to a PV yield of 804.69 GWh, which equates to reductions of 325.10 kt in standard coal consumption and 701.69 kt in CO2 emissions. (2) Based on the calculated potential solar energy utilization of the building envelopes, it was shown that the utilization of solar radiation on roofs and facades would promote low-carbon urban development. The utilization of solar energy on the facades of high buildings will contribute to the supply of energy for these buildings and help balance their energy consumption. (3) As the solar incidence angle changes over time, the reductions in energy consumption and CO2 emissions related to PV power generation are maximal in summer for building roofs, whereas no significant seasonal differences were observed for facades. (4) Incorporating the available area translates the utilization of solar energy and potential CO2 reductions from theory to practical application by reducing inefficient and invalid areas. The percentages of available area of roof and facade were estimated at 47% and 16% by comprehensive calculations considering three aspects (threshold, structure, and orientation). The corresponding potential of solar energy on the roofs and facades in the validation area B are 167.18 GWh and 53.63 GWh, respectively, compared to the original theoretic values of 316.97 GWh and 237.98 GWh.

Efficient matrix algebra encoding for urban solar irradiation simulation: fine-grid ground-level estimation with vector data

A Cross-Scale Methodological Framework for the Quantification of the Impact of Urban Features on Intra-City Microclimate

A WRF-UCM-SOLWEIG Framework for Mapping Thermal Comfort and Quantifying Urban Climate Drivers: Advancing Spatial and Temporal Resolutions at City Scale

Large-Scale Solar Potential Analysis in a 3D CAD Framework as a Use Case of Urban Digital Twins

Divergent Impact of Urban 2D/3D Morphology on Thermal Environment along Urban Gradients

A novel 3D-geographic information system and deep learning integrated approach for high-accuracy building rooftop solar energy potential characterization of high-density cities

GIS-Based Digital Twin Model for Solar Radiation Mapping to Support Sustainable Urban Agriculture Design

Instant infrared: Estimating urban surface temperatures from street view imagery

Solar Accessibility in High Latitudes Urban Environments: A Methodological Approach for Street Prioritization

RETRACTED: Calculating Potential of Solar Energy and CO2 Emissions Reduction for Cityscale Buildings Based on 3D Remote Sensing Technologies

Solar Energy Potential Using Gis-Based Urban Residential Environmental Data: A Case Study of Shenzhen, China

An Integrative Approach for Solar Energy Potential Estimation Through 3D Modeling of Buildings and Trees

Framework for Mapping and Optimizing the Solar Rooftop Potential of Buildings in Urban Systems

Measuring solar radiation and spatio-temporal distribution in different street network direction through solar trajectories and street view images

Predicting solar radiation in the urban area: A data-driven analysis for sustainable city planning using artificial neural networking

A New Approach for Understanding Urban Microclimate by Integrating Complementary Predictors at Different Scales in Regression and Machine Learning Models

Modelling long-term thermal comfort conditions in urban environments using a deep convolutional encoder-decoder as a computational shortcut

Assessing local heat stress and air quality with the use of remote sensing and pedestrian perception in urban microclimate simulations

Modeling Mean Radiant Temperature Distribution in Urban Landscapes Using DART

DeepRadiation: An intelligent augmented reality platform for predicting urban energy performance just through 360 panoramic streetscape images utilizing various deep learning models

Global Estimation of Building-Integrated Facade and Rooftop Photovoltaic Potential by Integrating 3D Building Footprint and Spatio-Temporal Datasets