Abstract:In the field of ultra-precision machining, the machining accuracy and the surface quality have increased with the demand. However, due to the varying needs of different fields, the requirements for the surface shapes of workpieces are complicated. Therefore, it is necessary to use multi-process processing methods to process complex curved surfaces. However, determining how to ensure the repeated positioning accuracy of multi-process machining has been an insurmountable problem in the field of ultra-precision machining. In this study, a repeated positioning method for the processing of complex spherical surfaces was designed, and the geometric errors were analyzed. This study was based on an ultra-precise five-axis turning and milling machine. First, the processed workpiece was repeatedly clamped and the workpiece was measured by an on-machine measurement method. By processing the detection data, the position error and the pose error after repeated clamping were obtained. Then, using the detection results of the various geometric errors of the ultra-precise five-axis machine tool, random simulation experiments were performed using the homogeneous transformation matrix (HTM) and multi-body system (MBS) methods. A large number of random simulation experiments predicted the theoretical range of errors in the repeated positioning process. Finally, the processing experiment was carried out according to the designed process. The results showed that this approach could effectively solve the problem of repeated positioning in ultra-precision machining. In addition, the results of the machining experiment were in the range of the calculated error theory, which proved that the calculation model was reliable.

Complete topographic measurement of the monolithic multi-surface workpiece on a cylindrical cavity

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Surface Form Measurement of a Small Roll Workpiece

An on-line measuring technique for lapping large aspherical mirror

Discussions on On-Machine Measurement of Aspheric Lens-Mold Surface

On-machine Measurement of a Slow Slide Servo Diamond-Machined 3D Microstructure with a Curved Substrate

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

Development of an on-machine measurement system for ultra-precision machine tools using a chromatic confocal sensor

An autonomous multisensor in situ metrology system for enabling high dynamic range measurement of 3D surfaces on precision machine tools

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Accurate Inner Profile Measurement of a High Aspect Ratio Aspheric Workpiece Using a Two-Probe Measuring System

Chromatic confocal sensor-based on-machine measurement for microstructured optical surfaces featuring a self-aligned spiral center

A New Centering Method of the Measuring Probe for Spiral Scanning-Based Surface Profile Measurement Systems

Evaluation on Ground Surface Accuracies of Large-Depth and Steeply Micro-Structured SiC Surfaces

Scanning Tunneling Microscopy-Basedin Situmeasurement of Fast Tool Servo-Assisted Diamond Turning Micro-Structures

On-machine measurement method and geometrical error analysis in a multi-step processing system of an ultra-precision complex spherical surface