Abstract:To make a better application of phase change material (PCM) in the thermal management of aerospace systems, this paper investigates effects of the variation of foam-metal pore structure on the thermal performance of composite PCM (CPCM) subjected to different force fields. A two-dimensional numerical model based on the enthalpy-porosity method and the two-temperature energy equation is developed and verified with the experimental data. The thermal behavior of CPCM with different porosities (ω = 20 PPI, ε = 0.91, 0.93, 0.95 and 0.97) and different pore densities (ε = 0.95, ω = 10, 20, 40 and 80 PPI) are investigated under centrifugal acceleration conditions of 0, 5 and -5 g, respectively. A novel index of "end-state isobars" is introduced to describe the melting process of CPCM. The results show that the isotherms of CPCM liquid phase evolve gradually towards the interface parallel to end-state isobars in all conditions. At 0 g, decreasing the porosity effectively improves the thermal conduction of CPCM and slows down the approaching of the isotherms to the end-state isobars. Similarly, increasing the pore density significantly weakens the natural convection of liquid PCM and can also slows down the approaching isotherms to the end-state isobars. At 5 g, the isotherms can match exactly with the end-state isobars, after which the heat transfer process mainly depends on conductive. And decreasing the porosity can significantly improve the thermal performance of CPCM, while adjusting the pore density has almost no effect. At -5 g, the natural convection strength of CPCM is enhanced, changing porosity has limited effect on the heat transfer performance of CPCM, while decreasing pore density can significantly enhance the heat transfer performance. The results may provide some valuable reference for the evaluation and design of latent heat thermal energy storage (LHTES) system suitable to the aerospace field.

Experimental assessment of the heat shielding performance by the integration of phase change material and liquid cooling plate

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Experimental Investigation on Thermal Performance of Phase Change Materials–metal Foam Composites in Ocean Thermal Engine

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

A Pore Scale Study on Heat Transfer Characteristics of Integrated Thermal Protection Structures with Phase Change Material

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Heat transfer enhancement performance of microencapsulated phase change materials latent functional thermal fluid in solid/liquid phase transition regions

Experimental and numerical investigations on the intermittent heat transfer performance of rectangular cavity plate fin phase change material based heat sink

Heat transfer performance by forced convection of microencapsulated phase change material-latent functional thermal fluid flowing in a mini-channels heat sink

An Experimental Study of the Latent Functionally Thermal Fluid with Micro-Encapsulated Phase Change Material Particles Flowing in Microchannels

Heat transfer analysis of phase change material composited with metal foam-fin hybrid structure in inclination container by numerical simulation and artificial neural network

Experimental study on an integrated system of thermosyphon loop and vapor compression assisted with phase change material for pulse heat load

Study of a novel thermal management system using double-layer liquid-cooled plate-coupled PCM under high-rate discharge

Numerical Study on the Cooling Method of Phase Change Heat Exchange Unit with Layered Porous Media

Thermal performance assessment of phase change material for electronic cooling: An experimental investigation

Study on flow and heat transfer characteristics of phase change synergistic combination finned liquid cooling plate

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

A novel phase change material-based heat sink with an orthotropic plate to enhance the temperature field uniformity for avionics

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin