Abstract:Rechargeable Li–CO2 batteries offer a sustainable strategy for CO2 utilization and energy storage in an environmentally friendly way. However, the current Li–CO2 batteries are restrained by unsatisfactory electrochemical performance and lack of cost-effectiveness in practical application. Thus, developing low-cost and highly effective electrode materials is crucial. Inspired by the concept of high nickel and low cobalt content in the electrode material, ultrafine Co0.1Ni0.9Ox nanoparticles decorated on carbon nanotubes (Co0.1Ni0.9Ox/CNT) are first developed in this work. Through various characterization techniques, the effects of doping Co2+ cations on the properties and electrochemical performance are systematically studied. At a current density of 100 mA g–1, a battery with the Co0.1Ni0.9Ox/CNT electrode delivers a high capacity of 5871.41 mA h g–1 with a Coulombic efficiency of 92.91% and a low overpotential of 3.94 V with an energy efficiency of 68%. At a cutoff capacity of 500 mA h g–1, the battery based on the Co0.1Ni0.9Ox/CNT electrode can be easily operated for 50 cycles without the trace of capacity degradation, which is nearly twice more than those with the NiO/CNT and CNT electrodes. Compared with the NiO/CNT electrode, the Co0.1Ni0.9Ox/CNT electrode exhibits superior electrocatalytic activity in oxidation and evolution reactions of CO2, which results from doping Co2+ cations in the NiO lattice to improve the p-type electronic conductivity. In addition, the polymer-like discharge products affected by doping Co2+ provide better reaction interfaces, curtailing the overpotential and reducing the life span. The results enlighten new ideas of fabricating high-performance and cost-effective electrode materials for prolonging the cycling life of Li–CO2 batteries toward practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02655.TEM images of NiO/CNT; TG–DTG curves of NiO/CNT and Co0.1Ni0.9Ox/CNT; nitrogen adsorption–desorption isotherm with the pore-size distribution of CNTs and NiO/CNT; full discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; capacity-limited discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; XRD patterns of NiO/CNT and CNTs; EIS results of Co0.1Ni0.9Ox/CNT; and specific surface area and pore volume of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT (PDF)This article has not yet been cited by other publications.

Enhancing electrochemical performance of Fe2O3 via in situ sulfurization and carbon coating modification for nickel-iron rechargeable batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

FeS/C composite as high-performance anode material for alkaline nickel–iron rechargeable batteries

Manipulating the Electronic Structure of Nickel via Alloying with Iron: Toward High-Kinetics Sulfur Cathode for Na–S Batteries

Structure adapting of bulk FeS2 micron particles and the corresponding anode for high performance sodium-ion batteries

The Synergistic Effect of MoS2 and NiS on the Electrical Properties of Iron Anodes for Ni-Fe Batteries

Intergrated morphology engineering and alloying strategy for FeNi@NC Catalysts: Tackling the polysulfide shuttle in Li-S batteries

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

Fe2O3 Nanoparticle Seed Catalysts Enhance Cyclability on Deep (dis)charge in Aprotic LiO2 Batteries

Prediction Modeling for Ingot Manufacturing Process Utilizing Data Mining Roadmap Including Dynamic Polynomial Neural Network and Bootstrap Method

Improved Electrochemical Performance of Porous Fe3o4/Carbon Core/Shell Nanorods As an Anode for Lithium-Ion Batteries

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Improvement of Cycling Capability of Li2S-FeS Composite Positive Electrode Materials by Surface Coating With Titanium Oxide

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Regulating Electronic Structure of Fe–N4 Single Atomic Catalyst via Neighboring Sulfur Doping for High Performance Lithium–Sulfur Batteries

The effect of FeNC catalysts on the conversion kinetics and retention of lithium polysulfides for lithium-sulfur battery

Nickel Hydroxide-Modified Sulfur/Carbon Composite as a High-Performance Cathode Material for Lithium Sulfur Battery.

The Effect of Crystal Face of Fe2O3 on the Electrochemical Performance for Lithium-ion Batteries

Electrospun FeS2@Carbon Fiber Electrode As a High Energy Density Cathode for Rechargeable Lithium Batteries.

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Surface Electron Reconstruction of Catalyst Through Alloying Strategy for Accelerating Sulfur Conversion in Lithium‐Sulfur Batteries