Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Non-thermal melting of tungsten under intense electronic excitations

Atomic Investigation on the Facet‐Dependent Melting of Ceramic Nanostructures Via in Situ Electron Irradiation

Melting Curves And Entropy Of Fusion Of Body-Centered Cubic Tungsten Under Pressure

Electronic excitation induced non-thermal phase transition of tungsten

Non-thermal effect on collision cascade of tungsten

Visualization of Ultrafast Melting Initiated from Radiation-Driven Defects in Solids

Interplay of thermal and non-thermal effects in x-ray-induced ultrafast melting

Mechanisms of nonthermal destruction of the superconducting state and melting of the charge-density-wave state by femtosecond laser pulses

Ultrafast atomic view of laser-induced melting and breathing motion of metallic liquid clusters with MeV ultrafast electron diffraction

Nonequilibrium Phase Change in Gold Films Induced by Ultrafast Laser Heating.

Thermal structural disorder and melting transition in high-angle grain-boundary: a molecular-dynamics study

Atomistic Processes of high-temperature plastic deformation of nanoscale body-centered cubic tungsten

Heterogeneous to Homogeneous Melting Transition Visualized with Ultrafast Electron Diffraction

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Integrated Continuum-Atomistic Modeling of Nonthermal Ablation of Gold Nanofilms by Femtosecond Lasers

Controlled Melting of a Wigner Ion Crystal with Atomic Resolution

Calculation and analysis of lattice thermal conductivity in tungsten by molecular dynamics

Pausing ultrafast melting by timed multiple femtosecond-laser pulses

Imaging the Ettingshausen effect and cryogenic thermoelectric cooling in a van der Waals semimetal

Finite element modeling study of the suppression effect of external high magnetic field on the heat transfer of tungsten melt

Molecular Dynamic Simulation of Tungsten Ablation under Transient High Heat Flux