Abstract:The review is devoted to the use of impregnated activated carbon materials as chemisorbents of sulfur (IV) oxide. General methods for obtaining ordinary activated carbon, preparation of raw materials, their chemical activation with alkalis and acids followed by heat treatment (carbonization) in an inert environment or in the presence of a gaseous oxidizer, the role of acid-base and redox catalysts in this process are considered. The influence of the chemical composition of the activated carbon surface, the presence of functional groups, and their acid-base properties, as well as the products of surface reactions on the peculiarities of sulfur (IV) oxide adsorption is analyzed from the point of view of SO2 removal efficiency and the possibility of SO2 regeneration. An important role in these processes is played by the pore size, the possibility of co-adsorption of water, and the presence of an oxidant. The nature of adsorbent-adsorbate interactions on the surface of activated carbon, their energy, in particular, the contribution of so-called "physical" adsorption, van der Waals forces, hydrogen bonding, and the influence of surface functional groups are discussed. The activation of carbon raw materials with nitrogen-containing compounds leads to the N-doping of the surface, which increases the efficiency of SO2 adsorption, facilitating not only van der Waals and electrostatic interactions, but also S←N binding. The influence of oxygen and oxygen-containing functional groups on SO2 adsorption is also discussed. To obtain impregnated activated carbon for SO2 absorption, the original activated carbon of the required quality is impregnated with solutions of inorganic and organic compounds that remain on the inner surface of the activated carbon after drying. Impregnation blocks partly the porosity of activated carbon, but makes it more capable of chemical adsorption. Chemisorption, in which certain chemical bonds are formed between the surface of the activated carbon and the compound being adsorbed, is more selective than physical adsorption, where the size of molecules is critical for an effective capture process. It can be noted that unlike inorganic alkalis, which spoil the porous structure of activated carbon, treatment with a solution of ammonia or organic N-containing bases promotes SO2 absorption. A special place in gas purification is occupied by activated carbon impregnated with ionic liquids, non-aqueous solvents being used for impregnation. A separate issue of the chemisorption of sulfur (IV) oxide by samples of impregnated activated carbon based on d-metals will be discussed in detail below.

A sustainable solution: mitigating sulphur dioxide emissions through adsorption on chemically modified iron oxide nanoparticles

Highly Selective Mixed-Matrix Adsorbents Embedded with Anion-Pillared Microporous Materials and Poly(ionic Liquid)s Toward Sulfur Dioxide Capture

Enhancement of Sulfur Oxide Capture Capacity by Deposition of Iron Oxide Particles on Graphene Oxide

Simultaneous Removal of SO2 and NO by FeII(EDTA) Solution: Promotion of Mn Powder and Mechanism of Reduction

Removal of Nitric Oxide from Flue Gas with Iron Thiochelate Aqueous Solution in A Turbulent Contact Absorber

Heterogeneous Uptake and Oxidation of So2 on Iron Oxides

Integrated Tests for Removal of Nitric: Oxide with Iron Thiochelate in Wet Flue Gas Desulfurization Systems

Harmless Treatment of Sulfuryl Fluoride by Chemical Absorption

Novel Method for High-Performance Simultaneous Removal of NOx and SO2 by Coupling Yellow Phosphorus Emulsion with Red Mud

Synergistic Adsorption and in Situ Catalytic Conversion of SO2 by Transformed Bimetal-Phenolic Functionalized Biomass.

Absorption of dilute sulfur dioxide in ethanediamine with ethylene glycol or polyethylene glycol 400 plus water system

Mechanical insights into desulfurization by peroxymonosulfate oxidation via a non-reactive oxygen species pathway

Mechanism of over-stoichiometric oxidation of SO2 by iron oxides modified pyridinic N-doped carbonaceous materials

SO2REMOVAL WITH FERRIC SULFATE SOLUTION

Enhanced production of Fe(II) and Fe(0) by elemental sulfur modification on iron oxide to boost peroxymonosulfate activation for pollutants removal

CHARACTERISTICS OF SULFURDIOXIDE ABSORPFION IN MULTI-COMPONENT SUSPENSIONS

Sulfur dioxide removal: An overview of regenerative flue gas desulfurization and factors affecting desulfurization capacity and sorbent regeneration

IMPREGNATED ACTIVATED CARBON MATERIALS FOR RESPIRATORY PURPOSE. CHEMISORPTION OF SULFUR DIOXIDE

Sulfur Dioxide Capture by Heterogeneous Oxidation on Hydroxylated Manganese Dioxide.

SO 3 removal by submicron absorbents synthesized via inhibition method: The product layer grows like parallel peaks

Adsorption of Sulphur Dioxide and Reduction of Sulphate on Alumina and Alkali-Alumina at High Temperatures