Nitrogen-doped mesoporous carbon supported CuSb for electroreduction of CO 2

Yue Hou,Cheng-Jie Jiang,Ying Wang,Jing-Wei Zhu,Jia-Xing Lu,Huan Wang

DOI: https://doi.org/10.1039/d2ra01893d

IF: 4.036

2022-01-01

RSC Advances

Abstract:CuSb anchored onto nitrogen-doped mesoporous carbon (CuSb/NMC) were prepared for electroreduction of CO 2 to CH 4 , C 2 H 4 and CO.

chemistry, multidisciplinary

What problem does this paper attempt to address?

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Wenwen Lin,Hao Chen,Zihao Li,Kotaro Sasaki,Siyu Yao,Zihao Zhang,Jing Li,Jie Fu

DOI: https://doi.org/10.1002/cssc.202100659

IF: 8.4

2021-01-01

ChemSusChem

Abstract:The electroreduction of carbon dioxide to hydrocarbons has been proposed as a promising way to utilize CO2 and maintain the ecosystem carbon balance. However, the selective reduction of CO2 to C-2 hydrocarbons is still challenging. In this study, a highly efficient heterostructured catalyst has been developed, composed of a carbon nitride (CN)-encapsulated copper oxide hybrid (CuxO/CN). The interaction between the metal and carbon nitride in the heterostructured catalysts improves the intrinsic electrical conductivity and the charge transfer processes at metal-support interfaces. A remarkable enhancement in the selectivity of hydrocarbons is achieved with these modified Cu-based electrocatalysts, with an onset potential of -0.4 V and high C2H4 faradaic efficiency of 42.2 %, and these catalysts can also effectively suppress H-2 evolution during the CO2 reduction reaction. This work provides a simple and cost-effective method for synthesizing CN-encapsulated catalysts that provides the possibility of efficiently converting CO2 into C-2 hydrocarbons.
Monodispersed Cu Sites Assembled on Ultrathin 2d C3n4 for Efficient Electrocatalytic Co2 Methanation

Siyu Yi,Zhaolong Wang,Zhongqiu Wu,Xiaofan Yang,Haibo Wang,Jingman Yang,Xiaojie She,Hui Xu

DOI: https://doi.org/10.1016/j.apsusc.2024.161492

IF: 6.7

2025-01-01

Applied Surface Science

Abstract:Electrocatalytic CO2 reduction (ECO2R) to methane is a promising technology that could effectively realize carbon resource integration and energy recycling. Currently, Cu-based catalysts are the most effective catalysts for this process, and a long-term goal of high selectivity and high stability still remains elusive. In this study, a controllable and multistep solid-state pyrolysis route is implemented to successfully introduce atomically dispersed Cu sites (Cu SA) into the two-dimensional carbon nitride (2D C3N4) matrices. The active site density and morphology structure of the Cu SA-2D C3N4 catalyst could be precisely controlled by adjusting the calcination process. Through the strategic combination of an ultrathin 2D structure and uniformly dispersed active sites, the Cu SA-2D C3N4 maximizes the exposure of active sites while suppressing competitive C-C coupling reactions. Ultimately, the optimized Cu SA-2D C3N4-30 exhibit a Faradaic efficiency of 62.9 % for CO2-to-CH4 conversion with a partial current density of 172.4 mA cm-2 at -1.68 V vs. RHE. This work demonstrates an advanced Cu-based electrocatalyst that effectively improves the performance of electrocatalytic CO2 methanation.
Efficient electrochemical reduction of CO 2 promoted by the electrospun Cu 1.96 S/Cu tandem catalyst

Shuo Liu,Yu Cao,Hai Liu,Huili Wang,Baoshan Zhang,Yiming Zhang,Lihong Zhang,Sheng Zhang,Jie Sun

DOI: https://doi.org/10.1039/d1nr04802c

IF: 6.7

2021-01-01

Nanoscale

Abstract:The Cu 1.96 S/Cu tandem structure embedded in N-doped carbon nanofibers is an efficient catalyst for electrochemical reduction of CO 2 to CO. During the preparation, zinc was employed as a sulfur-fixing agent as well a pore-forming agent.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Enhancing CO2 electroreduction to CH4 over Cu nanoparticles supported on N-doped carbon

B. Han,Ruizhi Wu,Xupeng Yan,Xue-qing Xing,Zhonghua Wu,Jianling Zhang,Chunjun Chen,Shoujie Liu,Zhimin Liu,Jun Ma,Yahui Wu

DOI: https://doi.org/10.1039/d2sc02222b

IF: 8.4

2022-07-05

Chemical Science

Abstract:The electroreduction of CO2 to CH4 has attracted extensive attention. However, it is still a challenge to achieve high current density and faradaic efficiency (FE) for producing CH4 because the reaction involves eight electrons and four protons. In this work, we designed Cu nanoparticles supported on N-doped carbon (Cu-np/NC). It was found that the catalyst exhibited outstanding performance for the electroreduction of CO2 to CH4. The FE toward CH4 could be as high as 73.4% with a high current density of 320 mA cm−2. In addition, the mass activity could reach up to 6.4 A mgCu−1. Both experimental and theoretical calculations illustrated that the pyrrolic N in NC could accelerate the hydrogenation of *CO to the *CHO intermediate, resulting in high current density and excellent selectivity for CH4. This work conducted the first exploration of the effect of N-doped species in composites on the electrocatalytic performance of CO2 reduction.

Environmental Science,Chemistry,Medicine,Materials Science
Cu7S4 Nanosheets Enriched with Cu–S Bond for Highly Active and Selective CO2 Electroreduction to Formate

Yan Wen,Nan Fang,Wenqiang Liu,Tang Yang,Yong Xu,Xiaoqing Huang

DOI: https://doi.org/10.1039/d3ta00628j

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:Cu7S4 nanosheets enriched with Cu–S bond can facilitate the kinetics of CO2 electroreduction to HCOO− and suppress the formation of *CO as a result of the high FE of HCOO− (82.7%) and high partial current density (456 mA cm−2).
Facile synthesis of single-nickel-atomic dispersed mesoporous carbon nanosheets with controllable nitrogen doping for efficient electrochemical CO2 reduction

Hui Xu,Liming Qiu,Chunmei Lv,Hongbing Zheng,Yongzheng Zhang,Cheng Ma,Jitong Wang,Wenming Qiao,Licheng Ling

DOI: https://doi.org/10.1002/slct.202302699

2023-01-01

ChemistrySelect

Abstract:The catalytic conversion of CO2 into high value-added chemical products driven by electricity was an effective strategy to reduce atmospheric CO2 concentration. The development of high efficiency catalysts had always been the core for electrocatalytic reduction of CO2. The single transition metal sites anchored on nitrogen-doped carbon showed great potential in CO2 reduction reaction (CO2RR). In this paper, the atomically dispersed Ni-N sites are constructed on the two-dimensional mesoporous carbon nanosheets by the secondary pyrolysis method. The rich mesoporous structure of the two-dimensional nanosheets is beneficial to CO2 diffusion and adsorption during CO2RR, and the high nitrogen contents could increase the Ni single atom loadings. The nitrogen content and type could be controlled by regulating the ratio of nitrogen source to carbon source, and the catalyst activity is improved as the proportion of nitrogen sources increases. When the ratio of nitrogen source to carbon source is four, the oxidation state of Ni single atoms Ni@NMCN4 is between 0 and +2, and Ni single atoms exists as Ni-N-4 structure with pyridinic N of 32.78 %, which exhibits the best electrochemical CO2RR activity. The active site of Ni@NMCN4 is confirmed as the highly stable Ni single atoms. Moreover, the pyridinic N species are proved to play an important role in enhancing the CO2 electroreduction performance. This work provides a new perspective to adjust the nitrogen content and type in transition metal monatomic-N-doped carbon electrocatalysts for CO2RR.
Efficient and Stable Electroreduction of Co2 to Ch4 on Cus Nanosheet Arrays

Zhe Zhao,Xianyun Peng,Xijun Liu,Xiaoming Sun,Jing Shi,Lili Han,Guoliang Li,Jun Luo

DOI: https://doi.org/10.1039/c7ta05507b

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Converting CO2 into value-added hydrocarbon fuels has attracted enormous interest due to the advantage of simultaneously addressing major energy and environmental issues. Here we report on copper sulfide nanosheet arrays supported on nickel foam (CuS@NF) applied as a robust catalyst for CO2 electroreduction. A high faradaic efficiency of 73 ± 5% and a low Tafel slope of 57 mV dec−1 for CH4 formation were achieved. Moreover, the CuS nanosheets showed a stable CO2 electroreduction capability up to 60 h. The high performance of CuS@NF for CO2 electroreduction was ascribed to the nanosheet morphology as well as the presence of S species. This work illustrates how to design efficient and stable copper chalcogenide electrocatalysts for generating carbon-based fuels.
Cu2Sb decorated Cu nanowire arrays for selective electrocatalytic CO2 to CO conversion

Shiyong Mou,Yonghao Li,Luchao Yue,Jie Liang,Yonglan Luo,Qian Liu,Tingshuai Li,Siyu Lu,Abdullah M. Asiri,Xiaoli Xiong,Dongwei Ma,Xuping Sun

DOI: https://doi.org/10.1007/s12274-021-3295-1

IF: 9.9

2021-01-05

Nano Research

Abstract:The advancement of cost-effective and selective electrocatalyst towards CO2 to CO conversion is crucial for renewable energy conversion and storage, thus to achieve carbon-neutral cycle in a sustainable manner. In this communication, we report that Cu2Sb decorated Cu nanowire arrays on Cu foil act as a highly active and selective electrocatalyst for CO2 to CO conversion. In CO2-saturated 0.1 M KHCO3, it achieves a high Faraday efficiency (FE) of 86.5% for CO, at −0.90 V vs. reversible hydrogen electrode (RHE). The H2/CO ratio is tunable from 0.08:1 to 5.9:1 by adjusting the potential. It is worth noting that HCOO− product was totally suppressed on such catalyst, compared with Sb counterpart. The improving selectivity for CO could be attributed to the bimetallic effect and nanowire arrays structure.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
In-situ CVD Synthesis of Ni@N-CNTs/carbon Paper Electrode for Electro-Reduction of CO2

Zhichao Miao,Jian Meng,Manfen Liang,Zhenbin Li,Yuzhen Zhao,Fangyuan Wang,Leilei Xu,Jinglin Mu,Shuping Zhuo,Jin Zhou

DOI: https://doi.org/10.1016/j.carbon.2020.10.044

IF: 10.9

2021-01-01

Carbon

Abstract:For the electro-reduction of CO2 to syngas, the fabrication of electrodes with excellent and adjustable catalytic performance is a critical step. In this work, Ni particles encapsulated in N-doped carbon nanotubes on carbon paper (Ni@N-CNTs/CP) composites were designed and prepared via an in-situ chemical vapor deposition method. As confirmed by different characterization techniques, the Ni@NCNTs are successfully synthesized, and the surface of the CP is evenly covered by the Ni@N-CNTs. The effects of Ni content and treating temperature on the textural properties of composites are carefully investigated. The Ni@N-CNTs/CP composites are directly employed as the electrode for electro-reduction of CO2, and the action mechanisms of the N species, Ni particles, and N-CNTs structure are explored as well. The electrode exhibits excellent catalytic activity and high stability, reaching a specific current of 10 mA cm(-2). The H-2/CO ratio in the achieved syngas can be tuned in the range of 5/1 to 1/1.5. (C) 2020 Elsevier Ltd. All rights reserved.
Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalyst.

Yue Zheng,Jiewen Xiao,Tianyu Zhang,B. Liu,Qian Wang,Shuyu Liang

DOI: https://doi.org/10.1002/anie.202310740

2023-09-13

Angewandte Chemie

Abstract:Electrochemical CO2 reduction to value-added chemicals or fuels offers a promising approach to reduce carbon emission and alleviate energy shortage. Cu-based electrocatalysts have been widely reported capable of reducing CO2 to produce a variety of multicarbon products (e.g., ethylene and ethanol). In this work, we develop sulfur-doped Cu2O electrocatalysts, which instead can electrochemically reduce CO2 to almost exclusively formate. We prove that a dynamic equilibrium of S exists at the Cu2O-electrolyte interface, and S-doped Cu2O undergoes in-situ surface reconstruction to generate active S-adsorbed metallic Cu sites during CO2 reduction reaction (CO2RR). Density functional theory (DFT) calculations together with in-situ infrared absorption spectroscopy measurements show that the S-adsorbed metallic Cu surface can not only promote formation of *OCHO intermediate, but also greatly suppress *H and *COOH adsorption, thus facilitating CO2-to-formate conversion during the electrochemical CO2RR.

Medicine,Chemistry
Dynamic Restructuring of Cu7S4/Cu for Efficient CO2 Electro‐reduction to Formate

Rui Yang,Xiaozhong Zheng,Hao Fu,Xinyue Cao,Yangguang Hu,Yiyin Huang

DOI: https://doi.org/10.1002/cssc.202301771

IF: 8.4

2024-02-23

ChemSusChem

Abstract:Cu7S4/Cu nanoflowers with strong CO2 adsorption and abundant boundaries were developed by a facile thermal reduction, which underwent in situ dynamic restructuring during ECR to generate highly active S‐doped Cu2O/Cu hybrid catalyst. Thermodynamic and experimental analysis revealed that the optimized adsorption of the HCOO* intermediate on S−Cu2O/Cu was regulated and surface H was suppressed by S‐doping. The high activity for CO2‐to‐HCOOH attributed to the strengthen CO2 adsorption, abundant boundaries at Cu2O/Cu interfaces, and the regulation of adsorption energy by S‐doping Optimized catalytic properties and reactant adsorption energy played a crucial role in promoting CO2 electrocatalysis. Herein, Cu7S4/Cu underwent in situ dynamic restructuring to generate S−Cu2O/Cu hybrid catalyst for effective electrochemical CO2 reduction to formate that outperformed Cu2O/Cu and Cu7S4. Thermodynamic and in situ Raman spectra revealed that the optimized adsorption of the HCOO* intermediate on S−Cu2O/Cu was regulated and the H2 pathway (surface H) was suppressed by S‐doping. Meanwhile, Cu7S4/Cu nanoflowers created abundant boundaries for ECR and strengthened the CO2 adsorption by inducing Cu. These findings provide a new perspective on synthetic methods for various electrocatalytic reduction processes.

chemistry, multidisciplinary,green & sustainable science & technology
Nitrogen-doped Porous Carbon Nanosheets As a Robust Catalyst for Tunable CO2 Electroreduction to Syngas

Jiaojiao Gui,Kaifu Zhang,Xiaowen Zhan,Yu,Tao Huang,Yunkai Li,Jingyu Xue,Xin Jin,Shan Gao,Yi Xie

DOI: https://doi.org/10.1039/d1se02034j

IF: 6.813

2022-01-01

Sustainable Energy & Fuels

Abstract:Two-dimensional N-doped porous carbon nanosheets with well-developed porosity and enriched pyridinic N sites are fabricated by a simple impregnation–calcination strategy, and exhibit excellent electrochemical CO2-to-syngas activity and durability.
Surface Nitrided CuBi2O4 Electrocatalysts with Excellent Selectivity for CO2 Reduction to Methanol

Lei Ma,Huan Liu,Youchao Song,Yiwei Zhang,Huijun Yu,Yuming Zhou

DOI: https://doi.org/10.2139/ssrn.4739693

2024-01-01

Abstract:Download This Paper Open PDF in Browser Add Paper to My Library Share: Permalink Using these links will ensure access to this page indefinitely Copy URL Copy DOI
N-Heterocyclic Carbene Coordinated Cu Single Atoms on Poly(ionic Liquid) for Selective Electroreduction of CO 2 to CH 4 at High Current Density

Biao Meng,Yujie Cao,Xiao Chi,Xiaoling Liu,Wenwen Guan,Chao Wu,Xiaojiang Yu,Siyu Zhu,Yizhong Huang,Yu Zhou,Shibo Xi,Jun Wang

DOI: https://doi.org/10.31635/ccschem.024.202404829

2024-01-01

CCS Chemistry

Abstract:Finely adjusting the local environment of Cu single atom (SA) is crucial but challenging for the fabrication of electrocatalysts for the CO2 reduction reaction (CO2RR) to produce clean energy methane (CH4). Herein, poly(ionic liquid)s-stabilized Cu SAs with tunable Br-Cu-C-x configuration were directly synthesized through the self-polymerization of the ionic liquid monomer, a bis-vinylimidazolium salt, in the presence of Cu precursor. Synchrotron X-ray absorption fine structure, soft X-ray absorption, and X-ray photoelectron spectroscopy analyses showed that the Cu SAs were coordinated with N-heterocyclic carbene derived from the imidazole ring. The optimal catalyst Cu@P-2 with moderate Cu loading afforded a high Faradaic efficiency of similar to 70% at a high current of -250 mA cm(-2) in the CO2RR to CH4, associating with a turnover frequency as high as 1.0 s(-1.) This outstanding performance is assigned to the high density Cu SAs reaching strong affinity towards *CO intermediates in the case of moderate Cu loading, as revealed by in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy analysis and theoretical calculated free energy profiles of CO2 RR to CH4.
Stabilizing intermediates and optimizing reaction processes with N doping in Cu2O for enhanced CO2 electroreduction

Chunliu Yan,Wen Luo,Huimin Yuan,Guiyu Liu,Rui Hao,Ning Qin,Zhiqiang Wang,Kun Liu,Zhenyu Wang,Dehu Cui,Zhuofeng Hu,Yangchun Lan,Zhouguang Lu

DOI: https://doi.org/10.1016/j.apcatb.2022.121191

2022-01-01

Abstract:Appropriate adsorption strength and modes of intermediates on catalysts and the reaction kinetic energy barrier directly determine the selectivity and productivity of final products during CO2 electroreduction. This work systematically reveals the mechanisms for enhanced CO2 electroreduction on nitrogen-doped Cu2O (N-Cu2O) catalyst by in-situ surface enhanced Raman spectroscopy (SERS) and theoretical calculation. The introduction of N into Cu2O can significantly enhance the CO2 adsorption capacity, binding strength of key intermediates and increase the local pH value, resulting in two-fold enhancement of CO and C2H4 production as compared to bare Cu2O. Meanwhile, the protonation step is promoted, making the formation of COOH center dot & nbsp; quickly and earlier. Therefore, the adsorbed CO(2)(center dot)(-& nbsp;)intermediate formation is produced more rapidly, and the rate-determining step is transferred, continually facilitating the electroreduction of CO2. This study is inspiring in designing high-performance electrocatalysts for CO2 reduction.
Ultrasmall Cu Nanocrystals Dispersed in Nitrogen-Doped Carbon As Highly Efficient Catalysts for CO2 Electroreduction.

Xiangfu Meng,Guoxing Pan,Hongji Liu,Yong Qian,Xingyu Wang,Changlai Wang,Lin Hu,Hui Wang,Qianwang Chen

DOI: https://doi.org/10.1021/acsami.2c00050

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:The electroreduction of carbon dioxide (CO2) to a liquid product is a viable method for establishing an artificial carbon cycle. Unfortunately, most electrocatalysts' low efficiency and instability prevent them from being used in practical applications. In the current study, we developed ultrasmall Cu nanocrystals embedded in nitrogen-doped carbon nanosheets (Cu/NC-NSs) for selective CO2 electroreduction by adjusting the potential. Cu/NC-NSs had 43.7 and 63.5% Faradaic efficiencies for the synthesis of ethanol and formate with applied potentials of -0.37 and -0.77 V vs reversible hydrogen electrode (RHE) using a flow cell architecture, respectively. Moreover, these Cu/NC-NSs show a steady catalytic performance up to 16 h. Density functional theory (DFT) calculations were performed to investigate the reaction mechanism. Furthermore, the synergistic effect formed by nitrogen-doped carbon and highly dispersed copper atoms led to their excellent performance in CO2 electroreduction.
Cu supported on polymeric carbon nitride for selective CO2 reduction into CH4: a combined kinetics and thermodynamics investigation

Jieyuan Li,Ping Yan,Kanglu Li,Junjie You,Hong Wang,Wen Cui,Wanglai Cen,Yinghao Chu,Fan Dong

DOI: https://doi.org/10.1039/c9ta05112k

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Metal-based cocatalysts have been widely applied in the photocatalytic CO2 reduction reaction (CO2RR) and the integration of cocatalysts/semiconductors is expected to enhance the selectivity of the catalytic reaction.
Nitrogen-Adsorbed Hydrogen Species Promote CO2 Methanation on Cu Single-Atom Electrocatalyst

Anxiang Guan,Yalei Fan,Shibo Xi,Haoliang Huang,Quan Zhang,Naixin Lyu,Bowen Wu,Yangshen Chen,Zhengzheng Liu,Chao Yang,Yali Ji,Miao Kan,Linjuan Zhang,Gengfeng Zheng

DOI: https://doi.org/10.1021/acsmaterialslett.2c01023

IF: 11.4

2022-01-01

ACS Materials Letters

Abstract:Cu single-atom catalysts are considered as efficient candidates to boost the electrocatalytic CO2 reduction to CH4, but the source of *H species for the CH4 formation during the multiple electron-proton transfer process is still elusive. Herein, we reported a facile strategy for the large-scale preparation of Cu single-atom catalysts via a solid-state pyrolysis strategy, with a Cu content of 3.86 wt %. The Cu single atoms were coordinated by four nitrogen atoms, which allowed to accelerate water dissociation to form *H species and stabilize key intermediates toward CH4. The Cu single-atom catalyst exhibited an excellent CO2-to-CH4 electroreduction performance, including a Faradaic efficiency of 68.2%, a high partial current density of 493.1 mA cm-2, and a good electrochemical stability. This work suggests a potential means of the mass production of Cu single-atom catalysts, with understanding of the mechanism of the CO2 electroreduction to CH4.
Covalency-aided electrochemical CO 2 reduction to CO on sulfide-derived Cu–Sb

Daniel Yong Yi Goh,Kah Meng Yam,Lavie Rekhi,Albertus Denny Handoko,Ying Chuan Tan,Yong Wang,Joel Ming Rui Tan,Tej Salil Choksi,Yanwei Lum,Lydia Helena Wong

DOI: https://doi.org/10.1039/d3ta04777f

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:Sulfide-derived catalysts tend to be more selective to HCOO − with suppression of CO production. We found that sulfur-doped Cu–Sb breaks the trend with improved CO selectivity.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Facile synthesis of supported CuNi nano-clusters as an electrochemical CO2 reduction catalyst with broad potential range

Jiale Wang,Fan Li,Runhua Li,Qian Xiang,Wencong Zhang,Chengyi Song,Peng Tao,Wen Shang,Tao Deng,Hong Zhu,Jianbo Wu

DOI: https://doi.org/10.1039/d3cc03758d

2023-01-01

Abstract:A nitrogen-doped carbon-supported CuNi bimetallic nanocluster catalyst (CuNi-NC) was first synthesized via a facile ZIF-derived method. With a synergistic effect between Cu and Ni, the catalyst exhibited a maximum FECO of 96.3%. FECO is higher than 90% in a broad potential range of 600 mV, which was ascribed to the controllable pore size distribution. Density functional theory further demonstrated the preferred formation of *COOH in the catalytic process.

Nitrogen-doped mesoporous carbon supported CuSb for electroreduction of CO 2

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Monodispersed Cu Sites Assembled on Ultrathin 2d C3n4 for Efficient Electrocatalytic Co2 Methanation

Efficient electrochemical reduction of CO 2 promoted by the electrospun Cu 1.96 S/Cu tandem catalyst

Enhancing CO2 electroreduction to CH4 over Cu nanoparticles supported on N-doped carbon

Cu7S4 Nanosheets Enriched with Cu–S Bond for Highly Active and Selective CO2 Electroreduction to Formate

Facile synthesis of single-nickel-atomic dispersed mesoporous carbon nanosheets with controllable nitrogen doping for efficient electrochemical CO<sub>2</sub> reduction

Efficient and Stable Electroreduction of Co2 to Ch4 on Cus Nanosheet Arrays

Cu2Sb decorated Cu nanowire arrays for selective electrocatalytic CO2 to CO conversion

In-situ CVD Synthesis of Ni@N-CNTs/carbon Paper Electrode for Electro-Reduction of CO2

Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalyst.

Dynamic Restructuring of Cu7S4/Cu for Efficient CO2 Electro‐reduction to Formate

Nitrogen-doped Porous Carbon Nanosheets As a Robust Catalyst for Tunable CO2 Electroreduction to Syngas

Surface Nitrided CuBi2O4 Electrocatalysts with Excellent Selectivity for CO2 Reduction to Methanol

N-Heterocyclic Carbene Coordinated Cu Single Atoms on Poly(ionic Liquid) for Selective Electroreduction of CO 2 to CH 4 at High Current Density

Stabilizing intermediates and optimizing reaction processes with N doping in Cu<sub>2</sub>O for enhanced CO<sub>2</sub> electroreduction

Ultrasmall Cu Nanocrystals Dispersed in Nitrogen-Doped Carbon As Highly Efficient Catalysts for CO2 Electroreduction.

Cu supported on polymeric carbon nitride for selective CO<sub>2</sub> reduction into CH<sub>4</sub>: a combined kinetics and thermodynamics investigation

Nitrogen-Adsorbed Hydrogen Species Promote CO2 Methanation on Cu Single-Atom Electrocatalyst

Covalency-aided electrochemical CO 2 reduction to CO on sulfide-derived Cu–Sb

Facile synthesis of supported CuNi nano-clusters as an electrochemical CO<sub>2</sub> reduction catalyst with broad potential range