Sequential usage of charged polyacrylamide for positive feedback in enhancing dewaterability of dredged sediment
Qingbo Zhang,Misha Liu,Jifu Yin,Chenwei Yuan,Xiaodan Mao,Guojun Hong,Yu Wang,Fan Yang,Fengting Li,Jie Li
DOI: https://doi.org/10.1016/j.jwpe.2023.104632
IF: 7
2023-12-08
Journal of Water Process Engineering
Abstract:With the widespread implementation of environmental dredging, the dewaterability of dredged sediment has become a crucial technical requirement. This study investigates the use of a dual flocculant , consisting of cationic polyacrylamide (CPAM) and anionic polyacrylamide (APAM), for sediment pretreatment. The purpose of this research is to assess the effects of the dual flocculant on sediment dewatering performance. The experimental results demonstrate that at a dose of 0.16 ‰ CPAM and 0.12 ‰ APAM of total solids in the sediment slurry, the water content of the sediment cake significantly decreases to 23.9 %. This reduction highlights the notable advantages of the dual flocculant in improving dewatering efficiency. The conditioned sediment exhibits lower turbidity (97.7 % reduction) of supernatant and rapid settling-velocity of the floc, indicating effective capture and separation of fine particles from the sediment. Moreover, the enhanced viscoelasticity of the sediment cake signifies a substantial improvement in floc structural strength. These properties collectively contribute to enhanced dewaterability during filtration and compression stages. Furthermore, the optimal dosing sequence of CPAM followed by APAM outperforms the reverse mode, facilitating a more favorable reaction between particles and polymers. Overall, the sequential use of charged polyacrylamide results in significant improvements in sediment dewaterability, cost savings, and secondary pollution prevention.
engineering, chemical, environmental,water resources