Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

Non‐Carbon‐Dominated Catalyst Architecture Enables Double‐High‐Energy‐Density Lithium–Sulfur Batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites

Efficient Synergism of Chemisorption and Wackenroder Reaction via Heterostructured La2O3‐Ti3C2Tx ‐Embedded Carbon Nanofiber for High‐Energy Lithium‐Sulfur Pouch Cells

NiCo Alloy-Decorated Nitrogen-Doped Carbon Double-Shelled Hollow Polyhedrons with Abundant Catalytic Active Sites to Accelerate Lithium Polysulfides Conversion

Isolated Single-Atom Ni-N-5 Catalytic Site in Hollow Porous Carbon Capsules for Efficient Lithium-Sulfur Batteries

Self‐Assembled Macrocyclic Copper Complex Enables Homogeneous Catalysis for High‐Loading Lithium‐Sulfur Batteries

Three-Dimensional Carbon-Catalyst As Sulfur Host for Polysulfide Regulation in Lithium-Sulfur Batteries

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

The CoFeNC@NC Catalyst with Numerous Surface Cracks Bidirectionally Catalyzes the Conversion of Polysulfides to Accelerate the Reaction Kinetics of Lithium–Sulfur Batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries

Constructing Monolithic Sulfur Cathodes with Multifunctional N,P Dual-Doped Carbon Nanocages to Achieve High-Areal-capacity Lithium-Sulfur Batteries

Monodispersed FeS2 Electrocatalyst Anchored to Nitrogen‐Doped Carbon Host for Lithium–Sulfur Batteries

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres Through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries

In Situ Transformation of LDH into NiCo<sub>2</sub>S<sub>4</sub>-NiS<sub>2</sub> Nano-heterostructures on Hollow Carbon Boxes to Promote Sulfur Electrochemistry for High-Performance Lithium–Sulfur Batteries

High-Performance Lithium–Sulfur Batteries with a Cost-Effective Carbon Paper Electrode and High Sulfur-Loading

Accelerated Sulfur Evolution Reactions by TiS2/TiO2@MXene Host for High‐Volumetric‐Energy‐Density Lithium–Sulfur Batteries

Co-Fe Mixed Metal Phosphide Nanocubes with Highly Interconnected-Pore Architecture as an Efficient Polysulfide Mediator for Lithium-Sulfur Batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries