Abstract:Hard stabilization methods have traditionally been employed to mitigate coastal erosion. Concrete armour is widely used due to its high level of dependence, robustness, ease of production and cost effectiveness (Cooke et al., 2020; Pikey and Cooper, 2012). It is inevitable that coastline ‘armouring’ will continue to rise because of the growing human population and urbanization, desire for and value of coastal property, opposed to predicted climate change (Chapman and Underwood, 2011). The environmental impact of such 'armouring' on coastal systems can be detrimental, resulting in a degradation or destruction of habitats and the loss of ecologically trivial species (Gittman et al., 2015). The CoastalockTM, a single-layer armour unit, aims to blend coastal protection with marine habitat creation. This armour unit is designed to mimic inter- and sub-tidal habitats, with chemical composition of substrate and micro and macro features that provide niches for various species. The key feature of CoastalockTM is the cavity that is integrated into the design, that caters to diverse marine life needs depending on its orientation (ECOncrete Tech Ltd., 2019). CoastalockTM's hydraulic performance is under research. Preliminary tests conducted in the Hydraulic Engineering Laboratory (HEL) of the Technical University of Delft (TUD) on a 2V:3H impermeable slope in deep water conditions highlighted that with tight placement of the units significant pressure gradients across the top layer led to damage. The introduction of spacings between units for enhanced permeability improved stability significantly (Gutiérrez et al., 2023). A redesign of the unit was proposed incorporating protrusions to enforce the spacings between the blocks (Molenkamp, 2022). This research focuses on evaluating the influence of a porous core on the hydraulic performance of a CoastalockTM armour layer, specifically assessing its stability, overtopping, and reflection on a 2V:3H breakwater slope in deep water conditions—from the toe to just below the crest. A pivotal aspect of this research is the investigation of the impact of protrusions on the hydraulic performance. Furthermore, the study explores the influence of different toe configurations, aiming to comprehend the vulnerability of the armour layer to sliding. Toe scour falls outside the scope of this study.

Hydraulic stability and wave overtopping characteristics of TblockTM armour units on a 3V:4H slope

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

Hydrodynamic Assessment of A New Nature-Based Armour Unit on Rubble Mound Breakwater for Coastal Protection

Experimental study on time-varying failure evolution of armour blocks on sloping breakwaters

Investigation Of Coastalock Performance On A Breakwater With Porous Core

Stability of Armour Block at Starting Part of Seawall

Numerical Evaluation of Wave Dissipation on a Breakwater Slope Covered by Precast Blocks with Different Geometrical Characteristics

Numerical Study on the Wave Dissipating Performance of a Submerged Heaving Plate Breakwater

DEVELOPMENT OF THE NEW TYPE ARMOR BLOCK WITH THE EFFECTS OF WAVE ATTENUATIONS AND ECO-REEF FOR

Physical Experimental Study on the Wave Reflection and Run-Up of a New Ecological Hollow Cube

Numerical analysis of interaction between flow characteristics and dynamic response of interlocked concrete block mattress during sinking process

Experimental Investigations on the Stability of Clayey Sloping Seabed under Wave Actions

The influence of shallow water on rock armour stability

Mechanical Behavior Monitoring and Load Inversion Analysis of Large-Diameter Underwater Shield Tunnel During Construction

Physical Modelling Of The Wave Field Around An Array Of Centrally Controlled Wave Energy Converters

The key to the enhanced performance of slab-like topologically interlocked structures with non-planar blocks

Damage Parameter Variations of Breakwater Along with a Floating Wave Barrier and a Submerged Obstacle

Failure mode and characteristics study of complex slope blocks under strong earthquake

Physical modelling of the stability of a revetment breakwater built on reclaimed coral calcareous sand foundation in the South China sea—random waves and dense foundation

Experimental study of an innovative method to reduce the damage of reshaping rubble mound breakwaters

Quality Assessment of the Armourstones for Some Black Sea Rubble Mound Breakwaters, Turkey